Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A400 Card Engine and Development Kit  >>   Problem starting up kit

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 04 May 2004 02:39 PM by  mikee@logicpd.com
Problem starting up kit
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
support@eternitytechnologies.com
New Member
New Member
Posts:


--
01 May 2004 05:58 AM
    I have recently purcahsed a Sharp SDK with a LH7A400-10 it is hooked to 3.5 inch screen. When I turn the power on I dont recv a prompt on the PC that it is attached to.

    I dont see any LEDs glowing on the board when the system is powered but the screen has colourful lines on it. The JTAG jumpers connect 1 and 3 and 4 and 6.

    If anyone can give me futher information then please let me know. Does this mean that this could be a problem with the board?
    mikee@logicpd.com
    New Member
    New Member
    Posts:


    --
    04 May 2004 02:39 PM
    devraj,

    Could you please make sure that the Card Engine is seated "firmly" on the application board. Sometimes it comes loose.

    Let me know if this helps.

    --mikee
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit