Hello,
I am trying to Flash simple standalone application into the boot flash memory but I am running into problem with codewarrior Flash programmer.

Following steps I did:
1. At Codewarrior IDE-> Flash Programmer, loaded the settings "M5485EVB_BootFlash.xml" found in Codewarrior's directory chain[Metrowerks\CodeWarrior\E68K_Support\Initialization_Files ]

2.When I tried to Program the ELF to Flash, I get the message that it is programming but it stays there even after 20-25 minutes !!!.

3. Here is log of "Flash Programmer"

*****************************************************
Unkown Error.



======================================================================
=== Target Configuration Settings
=== Connection: PEMICRO_USB
=== Target Processor: 548x
=== Target Init File: D:\Metrowerks\CodeWarrior\E68K_Support\Initialization_Files\MCF5485EVB.cfg
======================================================================
Connecting......Connected


======================================================================
=== Execute: Program
=== Timestamp: Fri Nov 19 10:19:54 2004
=== Flash Device: TE28F160C3B
=== Flash Organization: 1Mx16x1
=== Flash Mem Start Addr: 0xFFE00000
=== Flash Mem End Addr: 0xFFFFFFFF
======================================================================
Using Algorithm: Intel_TE28F160C3B.elf

Loading Flash Device Driver at: 0x00000000
Flash Driver Buffer is at: 0x00001800
Flash Driver Buffer Size is: 0x00004800
Done

Initialization Command Succeeded
Programming file E:\devlp\test\mcf547x-8x\obj\mwerks\m5485evb\m5485evb_eth-tx_flash.elf
Trying auto-detect...
File is NOT of type Binary/Raw Format.
Auto-detection is successful.
File is of type Elf Format.

Programming 0x000076B0 bytes of Target Memory at 0xFFE00000
*******************************************************************************

Let me know what I am missing here !. Any help is appreciated.

Thanks in advance.

-Kiran
Embedded systems engineer
Northern Power systems
Waitsfield, VT