Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A400 Card Engine and Development Kit  >>   MultiMediaCard Connection

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 24 Feb 2004 07:03 PM by  rwalters@qualcomm.com
MultiMediaCard Connection
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
michael.mcpartland@smith-nephew.com
New Member
New Member
Posts:


--
04 Nov 2003 12:49 PM
    The Card Engine (CE) HW Spec, section 2.4 indicates that the CE uses a standard 3-wire MMC interface (Command, Clock, and Bi-Directional Data).

    Section 5.4.3 of the same spec, shows that pin 49 of expansion connector J1B is for MMC SPI mode chip select. What is the relevance of this line if the CE only supports MMC mode?

    How does the CE perfrom MMC card insertion/detection?
    rwalters@qualcomm.com
    New Member
    New Member
    Posts:


    --
    24 Feb 2004 07:03 PM
    The CE supports both modes, I think. There is no card insertion/detection in the CE. That feature is something you would design into the MMC/SD connector itself, and wire back to the ARM on a GPIO line.
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit