Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 10 Sep 2003 09:30 AM by  Anonymous
reading and writing to user area of Fast Peripherals Chip Se
 0 Replies
You are not authorized to post a reply.
Author Messages



10 Sep 2003 09:30 AM
    I was planning to look at the timing characteristics of the external memory I/O by writing a small piece of assembly code to read and write to the user area of the Fast Peripherals Chip Select. I modified the 'hello' example to read and write to address 0x73000000 which is defined in the IO controller Interface Specification on the installation CD.

    However, the LogicLoader produces an "everything went wrong" screen when I do a 'jump' to the code.

    Is this address correct ?

    Is the CS7 memory bank configured by LogicLoader or is there more set-up required ?

    Yes, 0x73000000 is the user address of the Fast Paripherals Chip Select. LogicLoader doesn't set up that area of the memory map though. This explains the "everything went wrong" error message, and can be verified by typing 'info cpu' after the 'losh>' prompt.

    The space must first be configured before it can be of use.

    Andrew Wawra
    Tech Support
    Logic Product Development
    You are not authorized to post a reply.