Create Account
Search
You are here: TDG Forum  >>  Marvell SOMs and Development Kits  >>  PXA270 Card Engine and Development Kit  >>   Building a test OS with the BSP/ Active sync connection.

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 19 Sep 2005 11:30 AM by  dhayes
Building a test OS with the BSP/ Active sync connection.
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
dhayes
New Member
New Member
Posts:


--
14 Sep 2005 03:44 PM
    I followed the instructions in the BSP User's guide to build a minimal Windows CE 5.0 based OS.

    Loading the image via ethernet and booting worked just fine. When I tried plug in a USB cable, there is no response and no device appears under the device manager.

    On this same system, If I use one of the precompiled images from the web site, I see USB activity and the device appears under the device manager but we still can't sync.
    Anonymous
    Posts:


    --
    15 Sep 2005 02:01 PM
    Hello,

    Please check the release notes of the USBF driver:

    4) Dependancies
    ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    --) Note: While this driver is a BUS only driver, we include USB Client
    registry entries to provide a place to define what type of USB Function
    Client the device will be used as. The following are the currently
    supported mutually exclusive options:

    --) To enable USB ActiveSync functionality the following must be enabled:
    * Catalog Item(s):
    ".\Shell and User Interface\User Interface\Network User Interface"
    ".\Applications - End User\ActiveSync"
    ".\Device Drivers\USB Function\USB Function Clients\Serial"

    --) To enable USB Mass Storage functionality the following must be enabled:
    * Feature requirements:
    An accessible storage device (i.e. Compact Flash).
    A valid File System for the storage device.
    * Catalog Item(s):
    ".\Device Drivers\USB Function\USB Function Clients\Mass Storage"


    Please post back here if you have further questions.

    Thanks,
    dhayes
    New Member
    New Member
    Posts:


    --
    19 Sep 2005 11:30 AM
    We were missing Device Drivers\USB Function\USB Function Clients\Serial.

    Test image now connects with active sync.

    Thankyou for the help.
    You are not authorized to post a reply.

    Forums Marvell SOMs and Development Kits PXA270 Card Engine and Development Kit