Create Account
Search
You are here: TDG Forum  >>  Texas Instruments SOMs and Development Kits  >>  OMAP35x, DM3730, AM3703 SOM-LV Development Kit  >>   expansion board configuration in omap35x

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 29 Oct 2011 01:59 AM by  sakthivadivel.s@gmail.com
expansion board configuration in omap35x
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
sakthivadivel.s@gmail.com
New Member
New Member
Posts:


--
29 Oct 2011 01:59 AM
    Hi,
    I am using the u-boot-2009.08-rc2, linux-2.6.32. I have patched and loaded the u-boot and linux.I am successfully able to boot the device.
    Now i want to check the expansion board. I am not able to get any clock on pins 3(clk),7(cs0), 11,13 when i checked with oscope.
    What are the changes/configurations needed to enable the expansion board on omap35x.

    Thanks & Regards,
    sakthis.
    You are not authorized to post a reply.

    Forums Texas Instruments SOMs and Development Kits OMAP35x, DM3730, AM3703 SOM-LV Development Kit