Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 19 Nov 2010 10:49 AM by  richard.laborde@logicpd.com
GPIO questions
 3 Replies
Sort:
You are not authorized to post a reply.
Author Messages
kf6uzf
New Member
New Member
Posts:2


--
14 Aug 2009 02:19 PM
    Does the 35XX has user accessible or user defined GPIO lines. We need to have an interrupt occur every time a serial line's CTS toggles.

    Any help would be appreciated
    clnorris
    New Member
    New Member
    Posts:4


    --
    09 Nov 2009 09:57 AM
    There are many OMAP35x pins that can be used for GPIO. The pins are grouped into six "modules", and each module can interrupt the ARM or DSP.

    Take a look at the General-Purpose I/O (GPIO) Interface document for this processor:
    http://focus.ti.com/lit/ug/sprufd5a/sprufd5a.pdf
    mschwab
    New Member
    New Member
    Posts:


    --
    18 Nov 2010 11:16 AM
    That link is dead. Is there a new location for this GPIO document?
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    19 Nov 2010 10:49 AM
    For customers with registered kits, you can also review our GPIO app note - http://support.logicpd.co..._SOM_Using_GPIOs.pdf
    You are not authorized to post a reply.