HI

I am working  Enable bleuetooth on DM3730 Torpedo + Wireless System on Module (SOM) WL1283 + Zoom DM3730 Torpedo

I booted with linux(Used BSP-2.4-2 pre built  images) , While loading btwilink.ko module i am getting failed to read local ver

 

 

I followed following procedure

 

#insmod st_drv.ko

#/home/root/wl12xx/uim &

#insmod btwilink

DM-37x# insmod bluetooth/btwilink.ko
[  250.374084] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[  250.394805] (stc): st_register(2)
[  250.398437] (stc):  chnl_id list empty :2
[  250.402770] (stk) : st_kim_start
[  250.511840] (stk) :ldisc_install = 1uim: Inside mainuim: Inside st_uart_configuim:install set to 1
uim:opening /dev/ttyO1, while already open
DM-37x# uim:cleanup
uim: Inside set_baud_rateuim: set_baud_rate() do
[  250.575805] (stc): st_tty_open ne

[  250.582031] (stk) : line discipline installed uim: Installed N_TI_WL Line displine

[  251.390563] (stk) : waiting for ver info- timed out
[  251.395874] (stk) :kim: failed to read local ver
[  251.400878] (stk) :download firmware failed
[  251.405303] (stk) :ldisc_install = 0
[  251.514862] (stk) :ldisc_install = 1uim: Inside st_uart_configuim:install set to 1
uim:opening /dev/ttyO1, while already open
uim:cleanup

[  252.515533] (stk) :line disc installation timed out
[  252.520812] (stk) :ldisc_install = 0
[  252.630371] (stk) :ldisc_install = 1
[  253.632720] (stk) :line disc installation timed out
[  253.637969] (stk) :ldisc_install = 0
[  253.747589] (stk) :ldisc_install = 1
[  254.749969] (stk) :line disc installation timed out
[  254.755249] (stk) :ldisc_install = 0
[  254.864746] (stk) :ldisc_install = 1
[  255.867095] (stk) :line disc installation timed out
[  255.872375] (stk) :ldisc_install = 0
[  255.981964] (stk) :ldisc_install = 1
[  256.984313] (stk) :line disc installation timed out
[  256.989532] (stk) :ldisc_install = 0
[  256.993499] ti_st_open: st_register failed -22
DM-37x# /home/root/wl12xx/uim &[  281.524658] (stc): st_tty_close uim: Inside set_
[  281.534362] (stc): st_tty_open baud_rateuim: set_baud_rate() do
[  281.540985] (stc): st_tty_close ne
uim: Installed N_TI_WL Line displine
uim: Inside st_uart_configuim: Un-Installed N_TI_WL Line displine
uim:cleanup

Can Any one help me how to solve this??

 

Thanks