can you send some output? Like a screen capture of what you have in teraterm?

Sure can.

*****************************************************************
LogicLoader

© Copyright 2002-2003, Logic Product Development, Inc.
All Rights Reserved.
Version 1.1.2
*****************************************************************

Available commands:
load - download a binary image of type 'elf', or 'srec'
burn - burns the already-loaded image into flash device 'device'
erase - erases 'device' from start_address for length bytes
jump - jump to a loaded image, or [address]
exec - disable cache & ints, then jump to a loaded OS, or to [addr]
losh - execute a series of losh commands stored in <filename>
w - write memory [of specified width] at addr
x - examine memory with [width][format] at an addr for a [len]
date - display the number of seconds since boot
stats - display various system & lolo stats
version - print hardware and firmware version numbers
cmds - list the commands available for a type of functionality
losh> load elf
loading from stdin:
R

Is this where it stops? Or do you get more output?

that's were it stops.

I did some more testing. I think the problem is on the compile side. There was a subdirectory named pre-built. When I send down one of the files from there it downloads successfully. But when I compile the sample app myself, it does not work. The compiled myself file must not be the right format.

Do you want the output from the make session?

Yes please, you need to make sure you're either in .elf or .bin file format. Maybe that's a problem?

Yea - I think that is the problem. Now how do you fix the compiler so that it works with the directions in the user manual?

Here is the output from the gnu session that I used to compile the sample app.


Administrator@test ~
$ cd /home

Administrator@test /home
$ cd logic

Administrator@test /home/logic
$ cd sample_zoom_app

Administrator@test /home/logic/sample_zoom_app
$ cd src

Administrator@test /home/logic/sample_zoom_app/src
$ make distclean
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH75401_10; make archdistclean
make[1]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_75401.o serial_75401.o depend *~ sample_app stripped
rm: cannot remove `init_75401.o': No such file or directory
rm: cannot remove `serial_75401.o': No such file or directory
rm: cannot remove `*~': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH75401_10_FLASH
rm: cannot remove `.sample_LLH75401_10_FLASH': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
rm .sample_LLH75401_10_RAM
rm: cannot remove `.sample_LLH75401_10_RAM': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
make[1]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH79520_10; make archdistclean
make[1]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=79520 -DINFLASH=0 -fno-builtin -M main.c >
depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=79520 -DINFLASH=0 -fno-builtin -M init_7952
0.S serial_79520.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_79520.o serial_79520.o depend *~ sample_app stripped
rm: cannot remove `init_79520.o': No such file or directory
rm: cannot remove `serial_79520.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH79520_10_FLASH
rm: cannot remove `.sample_LLH79520_10_FLASH': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
rm .sample_LLH79520_10_RAM
rm: cannot remove `.sample_LLH79520_10_RAM': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
make[1]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH7a400_10; make archdistclean
make[1]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M main.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M init_7400.S serial_7400.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_7400.o serial_7400.o depend *~ sample_app stripped
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH7a400_10_FLASH
rm: cannot remove `.sample_LLH7a400_10_FLASH': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
rm .sample_LLH7a400_10_RAM
make[1]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=sh; export archdir=arch/sh; export LOGIC_CARDENGI
NE=LSH7727_20; make archdistclean
make[1]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
sh-linux-gcc -m3 -fno-reorder-blocks -O0 -Werror -Wall -g -I. -I/home/logic/samp
le_zoom_app/src/include -DCPU=7727 -DINFLASH=0 -fno-builtin -M main.c > depend
|| (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/sh ; make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/sh'
../../Makefile.inc:111: depend: No such file or directory
sh-linux-gcc -m3 -fno-reorder-blocks -O0 -Werror -Wall -g -I. -I/home/logic/samp
le_zoom_app/src/include -DCPU=7727 -DINFLASH=0 -fno-builtin -M init_7727.S seri
al_7727.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/sh'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/sh'
rm init_7727.o serial_7727.o depend *~ sample_app stripped
rm: cannot remove `init_7727.o': No such file or directory
rm: cannot remove `serial_7727.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[2]: [distclean] Error 1 (ignored)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/sh'
rm .sample_LSH7727_20_FLASH
rm: cannot remove `.sample_LSH7727_20_FLASH': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
rm .sample_LSH7727_20_RAM
rm: cannot remove `.sample_LSH7727_20_RAM': No such file or directory
make[1]: [archdistclean] Error 1 (ignored)
make[1]: Leaving directory `/home/logic/sample_zoom_app/src'

Administrator@test /home/logic/sample_zoom_app/src
$ make
You must make for a specific target:
make sample-LLH7a400-10_flash Sharp 7a400 Flash Version
make sample-LLH7a400-10_ram Sharp 7a400 RAM Version
make sample-LLH79520-10_flash Sharp 79520 Flash Version
make sample-LLH79520-10_ram Sharp 79520 RAM Version
make sample-LLH75401-10_flash Sharp 75401 Flash Version
make sample-LLH75401-10_ram Sharp 75401 RAM Version
make sample-LSH7727-20_flash Hitachi 7727 Flash Version
make sample-LSH7727-20_ram Hitachi 7727 RAM Version
make clean
make: *** [default] Error 1

Administrator@test /home/logic/sample_zoom_app/src
$ make sample-LLH7a400-10_ram
export INFLASH=0; export LOGIC_CARDENGINE=LLH7a400_10; export LOGIC_BOARD=LCE; m
ake sample
make[1]: Entering directory `/home/logic/sample_zoom_app/src'
make distclean
make[2]: Entering directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH75401_10; make archdistclean
make[3]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=75401 -DINFLASH=0 -fno-builtin -M main.c >
depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=75401 -DINFLASH=0 -fno-builtin -M init_7540
1.S serial_75401.c > depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_75401.o serial_75401.o depend *~ sample_app stripped
rm: cannot remove `init_75401.o': No such file or directory
rm: cannot remove `serial_75401.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH75401_10_FLASH
rm: cannot remove `.sample_LLH75401_10_FLASH': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
rm .sample_LLH75401_10_RAM
rm: cannot remove `.sample_LLH75401_10_RAM': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
make[3]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH79520_10; make archdistclean
make[3]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=79520 -DINFLASH=0 -fno-builtin -M main.c >
depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm7tdmi -mlittle-endian -O2 -Werror -Wall -g -I. -I/home/logi
c/sample_zoom_app/src/include -DCPU=79520 -DINFLASH=0 -fno-builtin -M init_7952
0.S serial_79520.c > depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_79520.o serial_79520.o depend *~ sample_app stripped
rm: cannot remove `init_79520.o': No such file or directory
rm: cannot remove `serial_79520.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH79520_10_FLASH
rm: cannot remove `.sample_LLH79520_10_FLASH': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
rm .sample_LLH79520_10_RAM
rm: cannot remove `.sample_LLH79520_10_RAM': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
make[3]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=arm; export archdir=arch/arm; export LOGIC_CARDEN
GINE=LLH7a400_10; make archdistclean
make[3]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M main.c > depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M init_7400.S serial_7400.c > depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
rm init_7400.o serial_7400.o depend *~ sample_app stripped
rm: cannot remove `init_7400.o': No such file or directory
rm: cannot remove `serial_7400.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
rm .sample_LLH7a400_10_FLASH
rm: cannot remove `.sample_LLH7a400_10_FLASH': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
rm .sample_LLH7a400_10_RAM
rm: cannot remove `.sample_LLH7a400_10_RAM': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
make[3]: Leaving directory `/home/logic/sample_zoom_app/src'
export INFLASH=0 ; export ARCH=sh; export archdir=arch/sh; export LOGIC_CARDENGI
NE=LSH7727_20; make archdistclean
make[3]: Entering directory `/home/logic/sample_zoom_app/src'
cd main ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
sh-linux-gcc -m3 -fno-reorder-blocks -O0 -Werror -Wall -g -I. -I/home/logic/samp
le_zoom_app/src/include -DCPU=7727 -DINFLASH=0 -fno-builtin -M main.c > depend
|| (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/main'
rm main.o depend *~ sample_app stripped
rm: cannot remove `main.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/sh ; make distclean
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/sh'
../../Makefile.inc:111: depend: No such file or directory
sh-linux-gcc -m3 -fno-reorder-blocks -O0 -Werror -Wall -g -I. -I/home/logic/samp
le_zoom_app/src/include -DCPU=7727 -DINFLASH=0 -fno-builtin -M init_7727.S seri
al_7727.c > depend || (rm -f depend && false)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/sh'
make[4]: Entering directory `/home/logic/sample_zoom_app/src/arch/sh'
rm init_7727.o serial_7727.o depend *~ sample_app stripped
rm: cannot remove `init_7727.o': No such file or directory
rm: cannot remove `serial_7727.o': No such file or directory
rm: cannot remove `*~': No such file or directory
rm: cannot remove `sample_app': No such file or directory
rm: cannot remove `stripped': No such file or directory
make[4]: [distclean] Error 1 (ignored)
make[4]: Leaving directory `/home/logic/sample_zoom_app/src/arch/sh'
rm .sample_LSH7727_20_FLASH
rm: cannot remove `.sample_LSH7727_20_FLASH': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
rm .sample_LSH7727_20_RAM
rm: cannot remove `.sample_LSH7727_20_RAM': No such file or directory
make[3]: [archdistclean] Error 1 (ignored)
make[3]: Leaving directory `/home/logic/sample_zoom_app/src'
make[2]: Leaving directory `/home/logic/sample_zoom_app/src'
touch .sample_LLH7a400_10_RAM
cd main ; make
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M main.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/main'
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -c -o main.o main.c
arm-elf-ar rcus /home/logic/sample_zoom_app/src/liblolo.a main.o
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/main'
cd arch/arm ; make
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
../../Makefile.inc:111: depend: No such file or directory
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -M init_7400.S serial_7400.c > depend || (rm -f depend && false)
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
make[2]: Entering directory `/home/logic/sample_zoom_app/src/arch/arm'
arm-elf-cpp -C -P -D_ASM_ -DCPU=7400 -DINFLASH=0 -I. -I/home/logic/sample_zoom_a
pp/src/include -Ush sample_app.lds.S > sample_app.lds
arm-elf-gcc -D_ASM_ -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -D
INFLASH=0 -c -o init_7400.o init_7400.S
arm-elf-gcc -mcpu=arm9tdmi -mlittle-endian -Werror -O2 -fno-omit-frame-pointer -
Wall -g -I. -I/home/logic/sample_zoom_app/src/include -DCPU=7400 -DINFLASH=0 -fn
o-builtin -c -o serial_7400.o serial_7400.c
arm-elf-gcc -nostdlib -o sample_app -T sample_app.lds init_7400.o serial_7400.o
../../liblolo.a -lgcc
arm-elf-objcopy --adjust-vma 0x0 sample_app
arm-elf-objcopy --strip-all sample_app stripped
make[2]: Leaving directory `/home/logic/sample_zoom_app/src/arch/arm'
cp arch/arm/stripped sample_LLH7a400_10_RAM
make[1]: Leaving directory `/home/logic/sample_zoom_app/src'

Administrator@test /home/logic/sample_zoom_app/src
$

Anyhow, I have finished printing all the manuals and am reading them now. I have also accessed the download site and am determining which ones I may need.

Thanks.

At this point I have downloaded the latest versions of tera term, cygwin, and GNU. I have resetup my development machine with these new versions and the same sample app source code that came on the original CD. I compiled the sample app the same way.

Still no luck.

I guess the next thing is to download the latest bolo and lolo?

Hello.. Anyone... Help...

I can't seem to find the directions for programming new version of Logic Loader into the board. I do not have a jtag programmer.

I found the directions for downloading a new version of Logic loader. I was able to boot the sdk into bolo. The directions say to 'load elf'. This failed because the format of the file is '.upd'. The options from bolo are elf and srec.

Does any of this stuff work as advertised? I would really like to get moving on this project...

Brian,

I used the update command to load the upd file. Not sure where I found the directions to use update ( It's not in the help screen), but it works.

Hope it helps.

BTW, we're in NH too.

Joe

Brian,

I used the update command to load the upd file. Not sure where I found the directions to use update ( It's not in the help screen), but it works.

Hope it helps.

BTW, we're in NH too.

Joe

jjfitzy -

Thanks for the input. I have been on the phone with Aaron in there tech support. He mentioned update as well. I tried it and it did not work. After some discussion with Aaron we figured out that the copy of lolo and bolo is so old that it won't accept current format files. This unit must have been sitting in someone inventory for some time.

At this point I am waiting for a response from Aaron. Since your in NH maybe I can borrow yours?

- Brian

Brian,

Have you tried using the elf version of bolo from the downloads page: bolo 1.4.3.elf and then rebooting and then trying the update command?

If I remember correctly, this is how I got my boards updated.

Joe

Yep. Tried it too. And I tried ver 1.4.0.elf. Still no luck.

- Brian

Eventually the folk's at logic were able to provide me with an updated version of lolo that would download and work. Somehow my board had a very old version. Everything seems to work now.