Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A400 Card Engine and Development Kit  >>   Download / Initialize can't find device

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 13 Jul 2004 12:09 PM by  shahjayesh
Download / Initialize can't find device
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
shahjayesh
New Member
New Member
Posts:


--
13 Jul 2004 11:42 AM
    Hi,

    When I build the image and then try to Download it..PB can't find my device. I'm able to ping the device from my computer but PB can't see it and if I give the device name it accepts the name but doesn't start the downlaod. PB keeps waiting for Bootme from the device.

    I had it working earlier but then I installed WinCE 5.0 and the BSP didn't work and since the new BSP aren't ready I uninstalled 5.0 but now my WinCE 4.2 doesn't connect to device for download and I have tried reinstall and cleaning the registry and all of those to see if it helps but no luck!!

    Thank you,
    Jay
    Anonymous
    Posts:


    --
    13 Jul 2004 11:58 AM
    shahjayesh,

    Can you post what you're sending as a bootscript? What do you have your network connection settings at? i.e IP address, netmask, etc...

    Also have you adjusted your settings under Target | Configure Remote Connection in Platform Builder?

    The more info you give me the easier it should be to track this down.
    shahjayesh
    New Member
    New Member
    Posts:


    --
    13 Jul 2004 12:09 PM
    Hi Aaron,

    Following is the clipboard copy of Tera Term.

    **********************************************************
    losh> ifconfig sm0 dhcp
    Starting DHCP on sm0
    losh> ifconfig

    sm0: up 10M half-duplex (413)
    sm0: mac: 00:08:ee:00:41:d3 ip: 10.95.21.87
    mask: 255.255.252.0 gw: 10.95.20.1

    *******************************************************

    I would then type bootme & at the prompt. Term Term then shows the Device name and starts printing Sent BOOTME.

    I did configure settings under Target | Configure Remote Connection in PB and its set both the Download and Kernel Transport to Ethernet.

    Thanks.
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit