I noticed (don't know when it started), that when I reboot my board I get the following (can someone at Logic tell me what's going on):
thanks,
/michel

CPLD_CE_REG_REVISION: 0x34 (rev: b)
CPLD_CE_REG_MODE : 0xfe
default screen (a): 10 1bpp
Error, found no suitable display drivers
Error, couldn't get a display handle.
must 'video-open' before drawing!

*****************************************************************
LogicLoader

(c) Copyright 2002-2004, Logic Product Development, Inc.
All Rights Reserved.
Version 1.4.0-LLH7a400_10 0025
*****************************************************************

Available commands:
load - download a binary image of type 'elf', 'bin', 'raw' or 'srec'
burn - burns the already-loaded image into flash device 'device'
erase - erases 'device' from start_address for length bytes
jump - jump to a loaded image, or [address]
exec - disable cache & ints, then jump to a loaded OS, or to [addr]
update - load and install an update image for this CardEngine
source - execute a series of losh commands stored in <filename>
w - write memory [of specified width, w is default] at addr
x - examine memory with [width][format] at an addr for a [len]
mem-cmp - compare memory from <a> to <b> for <len>
mem-fill - fill memory at <addr> for <count> with <value> in sizes of [bhw]
date - display the number of seconds since boot
info - print information about something
set - set a symbolic value, with no args prints symbol table
unset - remove a symbolic value from the symbol table
help - print help for a single command or a group of commands
losh>