I'm trying to load a new Image and deploy it on the Torpedo DM 3730 Wireless SOM through an SD Card. I currently have an image loaded and programmed into NAND that was based upon the default configuration "defconfig.new-bluez" to complete the initial Linux Bluetooth tutorial which I completed all the way through. Now trying to load an image based upon a new configuration in which I've only added a few files to the root file system I'm unable to load but the current image programmed in NAND opens up fine.
The block where it's looking for the mmc1 shows it recognizes the card is there but is unable to read "boot.scr". I've tried this with two different SD cards as well as different image configurations that were both default and custom but I receive the same message. Any help in changing this would be great!
Minicom Serial Output:
Texas Instruments X-Loader 1.42 BSP-dm37x-2.4-3 for dm3730logic (2015-06-25 13:)
DRAM: 256MB (ProductID defined)
Booting from NAND
NAND: in-chip ECC
SgnP image: 0x6f160 bytes read from NAND at offset 0x80000 to 80400000
U-Boot 2011.06 BSP-dm37x-2.4-3 (Jun 25 2015 - 13:15:07)
OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz
Logic DM37x/OMAP35x reference board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
Board: DM37xx Torpedo
Enable battery backup charger (BB_CFG = 0x1c)
NAND: 512 MiB
NAND: Internal to NAND ECC selected
Found '28' display panel
In: serial
Out: serial
Err: serial
Product ID data cached to: 40200000
Die ID #67e400029ff80000016b3a861800b01a
OTG_SYSCONFIG: 00000001 - needs to be 00002001
ID data ROM : Gen 2
Model : dm3730 Torpedo
Version Code : -30
Temp Grade : Commercial
Max Speed : 1000MHz
Part Number : 1023758
Model Name : SOMDM3730-30-2780AKCR-C
Serial Number: 4214M00179
Data (writethrough) Cache is ON
Net: smc911x-0
Hit any key to stop autoboot: 0
== Checking mmc1 for alternate boot script boot.scr ==
mmc1 is available
reading boot.scr
** Unable to read "boot.scr" from mmc 1:1 **
== Script not found on mmc 1, proceeding with defaultboot ==
kernel_location: nand-part, rootfs_location: /dev, rootfs_type: yaffs
Proceeds to load and start Image.