Go to previous topic
Go to next topic
Last Post 30 Oct 2012 02:33 AM by  jduran@gem-med.com
BSP 2.2: fail to build x-load
 2 Replies
Author Messages
jduran@gem-med.com
New Member
New Member
Posts:79


--
26 Oct 2012 11:12 AM
    The compilation of x-loader-1.46-omap3logic-BSP-2.2-1 has finished with the following error:

    arm-none-linux-gnueabi-ld -r -o libarm.o board.o ecc.o omap_bch_decoder.o omap_bch.o printf.o div0.o bch.o malloc.o _udivsi3.o _umodsi3.o memset.o
    make[1]: Leaving directory `/home/qduran/Linux_BSP/1022853_LogicPD_Linux_BSP_2.2-2/rpm/BUILD/x-loader-1.46/lib'
    error: Bad exit status from /home/qduran/Linux_BSP/1022853_LogicPD_Linux_BSP_2.2-2/tmp/rpm-tmp.99058 (%build)

    Joaquim Duran
    dtran11
    New Member
    New Member
    Posts:23


    --
    29 Oct 2012 09:40 PM
    Which guide are you following and which repository are you downloading x-load from?
    jduran@gem-med.com
    New Member
    New Member
    Posts:79


    --
    30 Oct 2012 02:33 AM
    I've followed the instructions from 'DM37x Linux BSP User Guide' Rev C (http://support.logicpd.co...x_Linux_BSP_UG.pdf), and I haven't downloaded x-load from any repository, it is already included from Linux BSP 2.2.

    I've compiled the BSP in an Ubuntu Linux 10.04 32 bits.

    Forums Texas Instruments SOMs and Development Kits OMAP35x, DM3730, AM3703 Torpedo SOM Development Kit
    ---