I had the same problem, this is what I did after I received Support from Logic:
I'm using the ColdFire 5475EVB, and my CF card has FAT file system on
it.
1. First your CPLD needs to be programmed.
I've used MC547X__64.upd file to program it.
2. If you want to mount it when you are in LiLo, do a mount fatfs /cf
losh> mount fatfs /cf
losh> cd /cf
losh> ls
D : webs 0
D : TEMP 0
3. In order to mount it from Linux (I'm running 2.4.26 kernel)
make sure your CF is detected during boot
fire_engine_cpld_init:98 hw revision a2
FireEngine CPLD HW revision 2
FireEngine CPLD SW revision 5
fire_engine_cpld_init:110 cpld_programmed 1
cfide_init:554 present 1
hda: 61MB, CHS=978/4/32
Partition check:
hda: p1
cfide_init:608 paritition 0 start 0 nr_sects 125184
cfide_init:608 paritition 1 start 32 nr_sects 123104
Then, do a mount
#mkdir /cf
#mount -t vfat /dev/hd/1 /cf
hda: p1
Hope this helps,
E.
|