Go to previous topic
Go to next topic
Last Post 05 Sep 2006 10:39 AM by  Anonymous
Booting over Network
 1 Replies
Author Messages
joy@zeuslearning.com
New Member
New Member
Posts:


--
05 Sep 2006 08:22 AM
    Hello,

    I do not have a compact flash card and wish to load linux over the network. The configuration that is used with the bsp assumes a compact flash card to be used for loading the kernel.

    What would I need to do in order to accomplish booting over the lan network and not a compact flash card?

    Any help will be much appreciated.

    Regards,
    Joy.
    Anonymous
    Posts:


    --
    05 Sep 2006 10:39 AM
    Hi Joy,

    There is no ethernet support in LogicLoader for the 9524 so you will probably need to use the Apex bootloader to accomplish this.

    Since this is a third party Linux port you'll want to contact Sharp or Marc Singer for this information as I am not sure how to do it. Marc's website can be found at the following link:

    http://wiki.buici.com/wiki/Main_Page

    Thanks,

    Forums NXP SOMs and Development Kits LH79524 Card Engine and Development Kit
    ---