Go to previous topic
Go to next topic
Last Post 03 Jan 2005 11:27 AM by
Anonymous
unable to open /dev/flash0 for burn
1 Replies
Author
Messages
Brian
New Member
Posts:
28 Dec 2004 11:08 AM
Hi -
I have been developing an ABL application for the 79520 for a while now. I am at the point where I would like the application to execute out of flash ram. I returned to the original sample applications in order to see what changes are needed to make an application work from flash memory.
the sample_RAM application compiles, downloads to ram, and then run's fine. But the sample_FLASH application compiles, downloads to ram, but then, when I execute the BURN command I get 'unable to open /dev/flash0 for burn'.
I have read through some of the other threads concerning flash ram and the burn command. I have checked my jumper setting and I have the latest lolo and bolo and I have the same results when I use bolo.
When I press the reset button I get a message from lolo (twice) 'flash error: invalid vendor id 0c at 0x40000000'
When I try 'ls /dev' it does not show the flash memory.
When I try 'erase 0x400c0000' 1024 it gives me the same error "unable to open /dev/flash0 for burn"
Is there something wrong with my flash chip? Do I need to rewrite the vendor id at 0x40000000?
any help would be great!
- Brian
Anonymous
Posts:
03 Jan 2005 11:27 AM
Brian,
Please email
platformsupport@logicpd.com
concerning these issues, it will be easier to handle this via email.
Thanks,
Forums
NXP SOMs and Development Kits
LH79520 Card Engine and Development Kit