Go to previous topic
Go to next topic
Last Post 12 Aug 2004 08:02 AM by
srikanth.chinnakonda@wipro.com
LCD - LQ64D343 (sharp) does now work.
2 Replies
Author
Messages
srikanth.chinnakonda@wipro.com
New Member
Posts:
12 Feb 2004 10:36 AM
Hi,
I have taken the starter kit and after putting all things togather losh comes up and works fine.
I have LQ64D343 LCD separate and have made the LCD cable according to specs. Upon connecting all things and doing "video-open 5 16" on losh prompt does not work. It gives time out and LCD remains as it is with some random vertical lines.
Any inputs ?
Is this proper way to test ? ( Logic ) or we can't use separate LCD and our data cable ?
I will appreciate any input on this..
thanks
bye
ketan
pelle2004@hotmail.com
New Member
Posts:
19 Feb 2004 04:58 AM
Hi
Proper setup on my card 79520 card is
losh> open_video 640 480 16 5
You will get random pixels on the display
losh> draw_flag
Now you will get proper color stripes.
Don't know if this helps...
srikanth.chinnakonda@wipro.com
New Member
Posts:
12 Aug 2004 08:02 AM
Hi all,
The LCD worked fine with the eval kit.
The card engine was not inserted properly. We had solved this problem long back itself. Just that I am logging on to this newsgroup after long time.
Thanks,
Srikanth
Forums
NXP SOMs and Development Kits
LH79520 Card Engine and Development Kit