Hello, I compiled and succesfully booted a 2.6.11.11 linux kernel, I also applied Marc Singer patches, however I'm unable to make the ethernet controller work.
On the ethernet switch I can see the connect LEDs lights up for 1 second then they switch off, after 1 second it comes up again and so on forever. The activity and link LEDs on the board are always off.
I found out that a similar problem has been caused by the first version of the SDK boards that had supplied a wrong voltage to the controller, however I double checked and my board is already fixed.
I have no idea what else it could be. Here's my kernel log, trying to get an IP address from a DHCP server.
Thanks for the help
*******************************************************************************
apex> xreceive 0xc0008000
CCCboot console=ttyAM1 root=/dev/nfs ip=dhcp nfsroot=10.0.0.13:/tftpboot,v3,tcp
Booting kernel at 0xc0008000...
Uncompressing Linux........................................................................... done, booting the kernel.
Linux version 2.6.11.11 (brain@DebianDevEnv) (gcc version 3.3) #2 Mon Jun 6 15:54:30 CEST 2005
CPU: ARM922T [41029220] revision 0 (ARMv4T)
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
CPU0: D cache: 8192 bytes, associativity 64, 32 byte lines, 4 sets
Machine: Logic Product Development LPD7A404-10
Memory policy: ECC disabled, Data cache buffered
Built 4 zonelists
Kernel command line: console=ttyAM1 root=/dev/nfs ip=dhcp nfsroot=10.0.0.13:/tftpboot,v3,tcp
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total
Memory: 62368KB available (1938K code, 356K data, 92K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
CLCD: registering amba devices
0 -> 0
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
JFFS2: default compression mode: priority
CLCD: LCD setup fb virt 0xffc00000 phys 0xc03c0000 l 26000 io 0xf8003000
CLCD: lh7a40x FB hardware, 3.5in QVGA display
CLCD: disabling LCD
CLCD: enabling LCD
Console: switching to colour frame buffer device 30x40
Real Time Clock Driver v1.12
serial: LH7A40X serial driver
ttyAM0 at MMIO 0x80000600 (irq = 38) is a LH7A40X
ttyAM1 at MMIO 0x80000700 (irq = 40) is a LH7A40X
ttyAM2 at MMIO 0x80000800 (irq = 42) is a LH7A40X
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
smc91x: IOADDR ce054000 doesn't match configuration (300).
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 0xce054000 IRQ 64
eth0: Ethernet addr: 00:08:ee:00:76:6c
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
lh7a404-ohci lh7a404-ohci0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 15 Dec 2004
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
Sending DHCP requests ...... timed out!
IP-Config: Retrying forever (NFS root)...
eth0: link down
......
|