Go to previous topic
Go to next topic
Last Post 20 Dec 2005 01:51 PM by  Anonymous
CPLD could not be updated, why?
 1 Replies
Author Messages
yingbohu
New Member
New Member
Posts:


--
17 Dec 2005 06:32 AM
    I am trying to update the CPLD code but I get some error message:

    File CPLD code file name is: 5485 128MC CPLD update file.upd
    I also tried LoLo 2.04, the result is the same.

    Who can help me?

    Thanks.

    Following is the message I got from Tera Term:



    spi not initialized: cpld code not detected.
    serial eeprom not initialized: cpld code not detected.
    spi not initialized: cpld code not detected.
    serial eeprom not initialized: cpld code not detected.
    CPLD not programmed.
    video-set-default: unable to open '/dev/serial_eeprom'
    no default screen

    *****************************************************************
    LogicLoader

    (c) Copyright 2002-2004, Logic Product Development, Inc.
    All Rights Reserved.
    Version 1.5.4-MCF5485_10 0001
    *****************************************************************

    Type 'help all' for a list of commands.

    losh> update
    send update file:Jam STAPL Player Version 2.3
    Copyright (C) 1997-2000 Altera Corporation

    CRC matched: CRC value = A391
    NOTE "CREATOR" = "Xilinx iMPACT Software"
    NOTE "DATE" = "2004/08/13"
    NOTE "STAPL_VERSION" = "JESD71"
    NOTE "ALG_VERSION" = "1"
    NOTE "DEVICE" = "UNSPECIFIED"
    NOTE "CHECKSUM" = "UNSPECIFIED"
    NOTE "IDCODE" = "UNSPECIFIED"
    NOTE "USERCODE" = "UNSPECIFIED"
    NOTE "TARGET" = "UNSPECIFIED"
    NOTE "STACK_DEPTH" = "4"
    NOTE "MAX_FREQ" = "1000000"
    ints off...
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    programming...
    -File Execution Failure.
    /Exit code = 16... Exiting ISP failure
    programming...
    |File Execution Failure.
    \Exit code = 16... Exiting ISP failure
    Anonymous
    Posts:


    --
    20 Dec 2005 01:51 PM
    Hello,

    It was determined that the board revision that you have is a pre-release beta and this functionality does not work correctly. You'll want to contact Freescale to RMA the board and get an up to date kit.

    Thanks,

    Forums Freescale / NXP SOMs and Development Kits M54xx EVB ColdFire Development Kit
    ---