Go to previous topic
Go to next topic
Last Post 26 Aug 2005 01:17 PM by  Anonymous
M5484EVB dBUG screen not appearing in tera term
 3 Replies
Author Messages
ameer
New Member
New Member
Posts:


--
26 Aug 2005 09:10 AM
    I just received the M5484EVBkit. I followed the start up instructions, but the dBUG monitor doesn't appear. I checked all the connections, tera term settings, and pressed reset but still nothing appears!!
    Anonymous
    Posts:


    --
    26 Aug 2005 11:32 AM
    Ameer,

    Here are a few questions I would ask:

    Are you sure that you're using a NULL Modem Serial Cable?

    Are you sure that all four connectors of the board are firmly connected?

    Are you sure that you are using the correct COM port as outlined in the User's Guide? ( This is the top left COM port )

    Thanks,
    ameer
    New Member
    New Member
    Posts:


    --
    26 Aug 2005 12:40 PM
    Thanks for your prompt reply. I just realised that the fire engine wasn't firmly inserted. I was afraid I would break it if I pushed it hard, but I guess that is what it needs.

    Thanks again.
    Anonymous
    Posts:


    --
    26 Aug 2005 01:17 PM
    Ameer,

    Glad to hear that it was something simple. Please feel free to use this forum for other questions that you have in the future.

    Thanks,

    Forums Freescale / NXP SOMs and Development Kits M54xx EVB ColdFire Development Kit
    ---