Go to previous topic
Go to next topic
Last Post 13 Apr 2009 03:54 PM by  richard.laborde@logicpd.com
Nothing on serail out of the box
 1 Replies
Author Messages
maestro
New Member
New Member
Posts:


--
13 Apr 2009 02:47 PM
    I have UART adapter to my workstation but nothing comes on minicom 9600 baud (or any other baud) when I attach the battery to board. I also tried to use USB attached to workstation also. I downloaded the microSD files for u-boot and inserted that in to the board but nothing displays either. Should I be seeing LoLo out of the box though?
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    13 Apr 2009 03:54 PM
    maestro -

    If your battery has a charge on it, you should see U-boot terminal traffic out the serial port at boot. (there is no LoLo for the MDK)
    Be sure your terminal program is setup properly per the quick start guide -115200, 8, no, 1 and your connector is plugged in correctly.

    The USB OTG port is only for charging with the basic U-boot.
    At power up you should see D7 come on. D6 and D5 will blink and then go out.

    If you have registered your kit you can use the Ask A Question system for more help.
    Thanks

    Richard

    Forums Texas Instruments SOMs and Development Kits OMAP3430 Zoom Mobile Development Kit
    ---