Issues with LogicLoader - Beacon EmbeddedWorks

Create Account

Create Account

You are here: >> >> >>

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

Forums
Search Forum
Advanced SearchTopicsPosts

Prev Go to previous topic

Go to next topic

Last Post 17 Nov 2014 04:15 PM by Alexander Duh

Issues with LogicLoader

2 Replies

Sort:


You are not authorized to post a reply.

Author

Messages

Alexander Duh

New Member
Posts:2

17 Nov 2014 02:07 PM
I'm using the lolo 2.3.11 to bootup a PXA270-10, -11, and my machine hardware fails to detect a sync pulse. When I was using an older lolo (2.0.5) on the PXA270-10 there was no such issue. What changed with the implementation that would cause this, and how can I compensate for these changes? Thanks, Alex

Adam Ford

Advanced Member
Posts:794

17 Nov 2014 02:15 PM
There are different versions of LogicLoader based on the NOR flash or NAND flash as well as the speed of the processor. Are you sure you are using the correct version of the LogicLoader for your SOM? If you have the wrong version, it may not necessarily boot correctly. adam

Alexander Duh

New Member
Posts:2

17 Nov 2014 04:15 PM
Hi Adam, I'm sure I'm using the correct version as there is only NOR flash based LogicLoader for PXA270-11 and I checked the processor speed...

You are not authorized to post a reply.

Forums Marvell SOMs and Development Kits PXA270 Card Engine and Development Kit