Create Account
Search
You are here: TDG Forum  >>  Texas Instruments SOMs and Development Kits  >>  OMAP36x Zoom Mobile Development Platform  >>   nand u-boot omap36 MDP

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 18 Jun 2018 04:08 PM by  Robert Mark
nand u-boot omap36 MDP
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
subhankh
New Member
New Member
Posts:


--
30 Sep 2010 09:51 PM
    hi, i type command "nand erase" on u-boot prompt using minicom after i typed "nand unlock" command then myzoom doing erase raw data.
    now when i restart myzoom3 MDP board i can't see u-boot prompt anymore. mdp board indicator on and still blue (not as the firstime before nand erase)
    i think that the u-boot and xloader is missing.
    is there anybody can help me how to recover or reflashing the x-loader n u-boot?
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    01 Oct 2010 03:37 PM
    It sounds like you erased your NAND - is that not what you intended to do with the commands you used?

    You will need to go to the omapworld.org site and follow the directions for reloading the code into NAND. After completing this, you will have the most up to date code in the Zoom3 unit.

    Good luck!
    Robert Mark
    New Member
    New Member
    Posts:1


    --
    18 Jun 2018 04:08 PM

    You have to board through the sd card and flash the URL from the U boot Nand using the erase shell command, the same process but boot the SPI flash this time. Use the SDK package. Hope it will be useful, for more help Dell tech support
    You are not authorized to post a reply.

    Forums Texas Instruments SOMs and Development Kits OMAP36x Zoom Mobile Development Platform