Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A400 Card Engine and Development Kit  >>   Problem bringing up Bootloader: Alpha characters fill screen

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 08 Sep 2003 12:50 PM by  elf-coastal@buici.com
Problem bringing up Bootloader: Alpha characters fill screen
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
Anonymous
Posts:


--
26 Aug 2003 01:59 PM
    The J6 JTAG jumpers need to be configured correctly for LH7A400-10 SDK normal operation.

    The position for normal operation is detailed in the Quickstart guide (figure 3.3).
    J6.1.3.5 and J6.2.4.6 should both be +

    If the JTAG Jumpers are not configured correctly the user will see alpha characters fill up their terminal screen.

    Andrew Wawra
    Tech Support
    Logic Product Development.
    elf-coastal@buici.com
    New Member
    New Member
    Posts:


    --
    08 Sep 2003 12:50 PM
    FWIW, leaving the J6 jumpers in the '-' positions does appear to work with the 7a400 as long as the console baud rate is set to 19200.
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit