zip file. It's been very difficult to find the correct kernel argument
parameters. Are they listed somewhere for this product? I've read
losh> ifconfig sm0 dhcp
Starting DHCP on sm0
losh> bootme
Device's name is LoCE_41569.
Sent BOOTME 1
Got response from a host ip: 192.168.5.1 port: 1447 cmd: 98
Connecting to Platform Builder
R
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
................................
image launch addr: 0xa0201000
Verifying checksums: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Checksums good.
BOOTME: loaded
BOOTME: Got jump command
losh> exec 0xa0201000 - rtc:rtc_pxa270:dbg_serial:PXA270_FFUART:dbg_enet:91C111:dbg_enet_base:0x09
000000:dbg_enet_irq:0x00000008:disp_num:5
kernel cmdline: 'rtc:rtc_pxa270:dbg_serial:PXA270_FFUART:dbg_enet:91C111:dbg_enet_base:0x09000000:
dbg_enet_irq:0x00000008:disp_num:5:ip_addr:192.168.5.10' at a0057fa0
Debug serial initialized. Using driver PXA270_FFUART
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0411 Revision=7
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 802011f4
==============================================================
WinCE firmware init (LoCE)
Kernel Arguments: "rtc:rtc_pxa270:dbg_serial:PXA270_FFUART:dbg_enet:91C111:dbg_enet_base:0x0900
0000:dbg_enet_irq:0x00000008:disp_num:5:ip_addr:192.168.5.10"
image_size: 0x1000000
ram_size: 0x2E00000
link_for_flash: 0
relocate_from_flash: 0
rom_offset: 0x20000000
==============================================================
Cold-boot: erasing object store.
Initializing interrupts.
Interrupt initialization complete.
Initializing system-tick.
System-tick initialized.
RTC initialized. Using driver rtc_pxa270.
Multiple XIP regions not defined or fixup failed.
driver globals at 0x80000000.
Firmware initialization complete.
Platform does not support or does not require extension DRAM.
Reported RAM installed is 64.0 MB
Sp=ffffc7cc