Create Account
Search
You are here: TDG Forum  >>  Freescale / NXP SOMs and Development Kits  >>  MCF5329 ColdFire Starter Development Kit  >>   problem with teraterm

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 08 Sep 2006 09:25 AM by  Anonymous
problem with teraterm
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
muller_idt
New Member
New Member
Posts:


--
08 Sep 2006 02:33 AM
    Hi,

    i've got a problem with teraterm. I'm on Windows 2000 operating system, and when i connect my MCF5329 Zoom ColdFire SDK, and start TERATERM (with Serial connection : baud rate : 115200, etc...), i havn't the welcome message of the board with the terminal.

    So , i can't upgrade the bootloader, or upload my program.

    There is no connection with the board ?

    Thanks.
    kurtl@logicpd.com
    New Member
    New Member
    Posts:


    --
    08 Sep 2006 09:24 AM
    I believe the default SW loaded on the kit is dBUG from Freescale which requires the baud rate to be set at 19200.

    From dBUG you can increase the baud rate and jump to Lolo if desired.

    Give that a try.
    -Kurt
    Anonymous
    Posts:


    --
    08 Sep 2006 09:25 AM
    Do you TeraTerm set up for COM1 under serial port?

    Also have you refered to this FAQ? It might explain a possibility of what's going on:

    http://www.logicpd.com/su...q/faq.php?faq_id=173

    Are there any error dialogues that come up?

    Can you provide a step by step process for how you're trying to get things up and running?

    Do you see two LEDs blinking back and forth on the baseboard?

    Thanks,
    You are not authorized to post a reply.

    Forums Freescale / NXP SOMs and Development Kits MCF5329 ColdFire Starter Development Kit