Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 16 Mar 2011 08:40 AM by  richard.laborde@logicpd.com
Kernel command line and M5484lite
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
pmatil@gmail.com
New Member
New Member
Posts:


--
16 Mar 2011 02:41 AM
    Hello all,

    I've downloaded the Linux BSP for M5484lite evaluation board and succesfully built kernel image for it. I haven't flashed u-boot (I boot from dBUG). So, I download the kernel image to ram:

    dBUG> dn -i vmlinux.bin
    Address: 0x00020000
    Downloading Image 'vmlinux.bin' from 192.168.90.1
    TFTP transfer completed
    Read 3022848 bytes (5905 blocks)

    Then boot it:

    dBUG> go 20000

    The problem is that the kernel doesn't have the nfsroot IP it should be i.e. there's still default IP config on the kernel command line. I changed the IP settings via config dialog offered by ./ltib -c but still the default IP settings apply. Am I missing some configuration reload procedure?

    regards,

    Petteri Matilainen
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    16 Mar 2011 08:40 AM
    Petteri,

    Unfortunately, this product has been around for quite a while and we don't have extensive support for Linux on it. Freescale is your best bet for getting help with Linux on this kit.

    Thanks
    You are not authorized to post a reply.