Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 23 Dec 2007 05:41 AM by  plattro@ch.schindler.com
Cant write or erase the application flash (U14 on MCF5475EV)
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
aliasgar.nasir@patni.com
New Member
New Member
Posts:


--
19 Nov 2007 03:50 AM
    I am not able to Erase or program the application flash. However i m able to read the manufacturers code and other stuff on the flash. I have a confusion . The schematic shows a pin WP* which comes from CPLD. However the datasheet for the 28F128 device does not have such a pin. If we need to make the WP* low, then how do i do it? Also the part number mentioned in the schemtic and the other docs for U14 is 28F256 while the actual device when i see on the board is 28F128. Please guide.
    plattro@ch.schindler.com
    New Member
    New Member
    Posts:


    --
    23 Dec 2007 05:41 AM
    I am having the same problem.

    I can program th FLASH with the included PEMicro BDM interface, but I seem to be missing something to be able to program the FLASH with embedded software.

    In January I'll check with Lauterbach (We use their debugger) to see what support they have to burn the FLASH on this board, maybe they've already solved the problem.

    I'm sure I'm missing something really obvious
    You are not authorized to post a reply.