I fixed it but new problems..
After i build the dependencies, I do a make again. This is what I get

B@bibhu /cygdrive/d/LinuxBSP-22012005-1.0.2/LinuxBSP-22012005
$ make
make -C linux-2.4.26 || exit 1
make[1]: Entering directory `/cygdrive/d/LinuxBSP-22012005-1.0.2/LinuxBSP-220120
05/linux-2.4.26'
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o scripts/split-include
scripts/split-include.c
scripts/split-include include/linux/autoconf.h include/config
/opt/logicpd/ColdFire/m68k-linux/gcc-3.4.3-glibc-2.3.5/bin/m68k-linux-gcc -D__KE
RNEL__ -I/cygdrive/d/LinuxBSP-22012005-1.0.2/LinuxBSP-22012005/linux-2.4.26/incl
ude -Wall -Wstrict-prototypes -Wno-trigraphs -O1 -fno-strict-aliasing -fno-common -pipe -ffixed-a2 -mcfv4e -fno-builtin -g -ggdb -DKBUILD_BASENAME=main -c
-o init/main.o init/main.c
make[1]: /opt/logicpd/ColdFire/m68k-linux/gcc-3.4.3-glibc-2.3.5/bin/m68k-linux-g
cc: Command not found
make[1]: *** [init/main.o] Error 127
make[1]: Leaving directory `/cygdrive/d/LinuxBSP-22012005-1.0.2/LinuxBSP-2201200
5/linux-2.4.26'
make: *** [linux] Error 1

I am getting the following error while trying to build the tool chain.
2.6.15-1.2054_FC5smp : This is the linux i am using.
Help!!!!


*** End of Linux kernel configuration.
*** Check the top-level Makefile for additional configuration.
*** Next, you may run 'make bzImage', 'make bzdisk', or 'make install'.

make[1]: Leaving directory `/home/bibhu85/Desktop/LinuxTools-1.0.2/LinuxBSP-22012005/linux-2.4.26'
++ awk '/^VERSION =/ { print $3 }' /home/bibhu85/Desktop/LinuxTools-1.0.2/LinuxBSP-22012005/linux-2.4.26/Makefile
+ KERNEL_VERSION=$'2\r'
++ awk '/^PATCHLEVEL =/ { print $3 }' /home/bibhu85/Desktop/LinuxTools-1.0.2/LinuxBSP-22012005/linux-2.4.26/Makefile
+ KERNEL_PATCHLEVEL=$'4\r'
+ case "$KERNEL_VERSION.$KERNEL_PATCHLEVEL.x" in
'4abort 'Unsupported kernel version 2
+ echo Unsupported kernel version $'2\r.4\r'
.4supported kernel version 2
+ exec false
make: *** [cross-toolchain] Error 1
[bibhu85@localhost LinuxTools]$

I'm not sure that you'll be able to build the tools using Cygwin. I've only built the tools as well as the kernel/userland on a x86 Linux box.

If Freescale has provided a set of ColdFire linux tools that run in Cygwin, you can try to use those instead of the default in /opt/logicpd/...

To do this, modify LInuxBSP-22012005/Makefile and change DEFAULT_TOOLPATH to hold the directory where the compiler is located (i.e. one dir up from .../bin/m68k-linux-gcc), that is if Freescale's compiler is m68k-linux-gcc. If the compiler prefix is *not* "m68k-linux-" then modify the line in LinxuBSP22012005/Makefile that create cross-compile-prefix (should be near 268).

Also remove LinuxBSP22012005/cross-compile-path and LinuxBSP22012005/cross-compile-prefix.

Then a "make fresh" should get you back on your way. SInce I've never built the world using Cygwin, I have no idea if this suggestion will help or not...

Thanks Peter!!!