Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Logic PD support staff and engineers participate, Logic PD does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Logic PD engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Logic PD product download, please subscribe to the TDG Forum of interest.

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 19 Jun 2009 05:36 PM by  raygloria
Proper LogicLoader boot script to launch Windows CE
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages

raygloria



New Member


Posts:
New Member


--
19 Jun 2009 05:00 PM
    Hi,

    After downloading the Windows CE Image to the target (i.MX27 LITEKIT) using Visual Studio 2005, I issued the following command using Tera Term Pro:

    Quote:
    exec dbg_serial:IMX27_UART:rtc:rtc_imx27:dbg_leds:1:disp_num:5:


    * 6.4" VGA Display Kit ("5")

    The target freezes and the OS Image failed to boot. Please advise...Thanks.
    I will post the error/warning output soon...

    raygloria



    New Member


    Posts:
    New Member


    --
    19 Jun 2009 05:36 PM
    Here is the output:

    Quote:
    losh> exec dbg_serial:IMX27_UART:rtc:rtc_imx27:dbg_leds:1:disp_num:5:
    Windows CE Kernel for ARM (Thumb Enabled) Built on Nov 24 2008 at 14:58:01
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
    LoLo Parameter: dbg_serial:IMX27_UART:rtc:rtc_imx27:dbg_leds:1:disp_num:5::ip_ad
    dr:19216821326
    Power on Reset - Clear RAM
    SW1A voltages: 0x1c71c (normal = 28, DVS = 28, standby = 28)
    SW1A configuration: 0x221605 (mode = 1, standby mode = 1, DVS speed = 0, panic =
    0, soft start = 1)
    OEMInit: Updating CSCR from 0x33230107 to 0x33238107 ...
    OEMInit: Updated CSCR to 0x33238107
    DeviceId................. LoCE_63677
    pArgs->flags............. 0x0
    pArgs->devLoc.IfcType.... 0
    pArgs->devLoc.LogicalLoc. 0x1002B000
    pArgs->devLoc.PhysicalLoc 0x1002B000
    pArgs->devLoc.Pin........ 0
    pArgs->ip4address........ 1
    pDevice->Name............ s
    pDevice->ifcType......... 0
    pDevice->id.............. 0x1002B000
    pDevice->resource........ 0
    pDevice->type............ 2
    pDevice->pDriver......... 0x81299000
    WARN: OALKitlInit: KITL Disabled
    From 1980 to 2158
    OALIoCtlHalGetHiveCleanFlag(HIVECLEANFLAG_SYSTEM)+
    Disable "COM1:" driver
    HCD driver DLL attach
    EHCD!HCD_Init
    HCD driver DLL attach
    EHCD!HCD_Init
    VBridge:: VB_INITIALIZED returns [0]
    UfnPdd_InitEndpoint: 0 Attrib(0)
    PwrMonThread: PBT_POWERINFOCHANGE
    PwrMonThread: AC line status 255, battery flag 255, backup flag 255, -1 levels
    Boot string 'lcdcinit' present but clear, display driver will initialize LCD
    Boot string calls for display: 5
    Over-riding registry setting of 1.
    Boot string 'lcdcinit' present but clear, display driver will initialize LCD
    Boot string calls for display: 5
    Over-riding registry setting of 1.
    Security Violation: Call Forward NOT SUPPORTED
    Failure to suspend the port, there must be something happening
    Receive interrupt with OTGSC (0x1200120) USBSTS (0x80), PORTSC (0x8c001804), USB
    CTRL (0x59484030)
    You are not authorized to post a reply.