Hi

We have a kernel, root filesystem and application running on an imx27ads board with a 2.6.19.2 linux kernel (from the Freescale BSP). We have just purchased a imx27 litekit board, and plan to port our work to it.

We managed load the kernel in ram with

load raw 0xa0208000 1674360 /tftp/10.0.0.100:zImage

But when we try to run it

exec -t

We only get

ATAG_CORE1, 4096, 255, 4, 1413545986, Uncompressing Linux.......................

and nothing else. Note we have the kernel parameters "console=ttymxc0,115200 root=/dev/nfs ip=10.0.0.101:10.0.0.100:10.0.0.100:255.255.255.0:litekit:eth0 nfsroot=10.0.0.100:/rootfs init=/sbin/init" compiled in the kernel.

Should the kernel, which runs smoothly on the ads board, work for the litekit out of the box, or is there any patch we have to consider?

Thanks