Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 11 Sep 2009 11:51 PM by  paiarunk@gmail.com
u-boot compile using u-boot-1.3.3 source
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages

paiarunk@gmail.com



New Member


Posts:
New Member


--
01 Sep 2009 05:29 AM
    Hai

    Has anyone tried running u-boot on top of LOLO on imx31 litekit board?

    I am able to compile the u-boot source for imx_litekit but i am not able to run?

    the commands used are

    export PATH="$PATH:/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/"
    export CROSS_COMPILE=arm-none-linux-gnueabi-
    make imx31_litekit_config
    make clean all


    I am downloading the image in LOSH using the command

    load srec //tftp//192.168.50.1/u-boot.srec
    exec

    Please help

    Arun

    joncastillo



    New Member


    Posts:
    New Member


    --
    09 Sep 2009 06:35 PM
    Hi Arun,

    I was wondering why u-boot wont run via losh as well. And I get 'CPU halted' on some initialization routine when I try to run it via JTAG (i think that was at 0x87F10D34). Earlier, I inserted:

    #define CONFIG_SKIP_LOWLEVEL_INIT 1

    inside:

    u-boot/include/configs/imx31_litekit.h

    and now it outputs properly on the serial port and my JTAG debugger can now step throughout the code without any errors. I wish someone could explain why this happens.

    paiarunk@gmail.com



    New Member


    Posts:
    New Member


    --
    11 Sep 2009 11:51 PM
    Posted By joncastillo on 9 Sep 2009 6:35 PM
    Hi Arun,

    I was wondering why u-boot wont run via losh as well. And I get ''CPU halted'' on some initialization routine when I try to run it via JTAG (i think that was at 0x87F10D34). Earlier, I inserted:

    #define CONFIG_SKIP_LOWLEVEL_INIT 1

    inside:

    u-boot/include/configs/imx31_litekit.h

    and now it outputs properly on the serial port and my JTAG debugger can now step throughout the code without any errors. I wish someone could explain why this happens.




    Thanks joncastillo, its working...
    Arun
    You are not authorized to post a reply.