You have to change the LIBGCC line to: otherwise it can not find the libraries.

-Tom

Sorry, forgot to mention that, ya i changed the LIBGCC line to what you stated also.

I can't figure out what the -lc is trying to do.

Thanks

No problem. BTW: This is also in the script I just posted. Maybe take a look to save some time. I am curious if you will get the same irq-90 problem...

Sorry, i was using the wrong lib. You were right. I was using what the instructions had said "also fix LIBGCC path, which is same as above except ends in
"lib" instead of "bin" "
I was not using the sysroot lib

Thanks

What about getting a 2.6.22.6 kernel working? I believe i got the 2.6.19.2 working, i am going to test that now, but i cannot get the 2.6.22.6 kernel compiled. Instructions are limited.

Thanks again

oh, and the -lc is for adding the library (if I remember well libc.a) but it should be in the lib search path, -l<xxx> is short for lib<xxx>.a, see man ld.

I get 2.6.22.6 compiled all right (with the script ) but I am stuck on the irq-90 for now. Hope someone will help...

After i load the loader and zImage to the board.
I give the command The board resets.
Since i loaded the files to RAM, i lose everything.

What am i doing wrong here?

ecastelo:

First, could you post a dump of your terminal window, kinda hard to guess where the problem is.
Though if i had to guess:

When you are downloading the zImage to the board make sure you check the it's
size. Otherwise it hangs.

ls -al /tftpboot/zImage
-rwxr-xr-x 1 root wheel 1629660 Mar 27 11:40 /tftpboot/zImage

load raw 0x81000000 1629660 /tftp/129.148.25.210:/tftpboot/zImage

zImage file size is different for me most of time after i compile.
Hope this helps
Reagrds,
Blair

There is actually nothing to dump.
I set the size and and location per the instructions. There were no errors loading the files. I typed the exec command and the board resets.

losh> load raw 0x800d03a8 35386 /tftp/172.16.142.68:/tftpboot/loader
loading from /tftp/172.16.142.68:/tftpboot/loader:
loading raw binary to 0x800d03a8 (ram) len 00008a3a:
........done
file loaded
losh> ls
R : load 35386
D : tftp 0
D : etc 0
D : dev 0
losh> load raw 0x81000000 1788596 /tftp/172.16.142.68:/tftpboot/zImage
loading from /tftp/172.16.142.68:/tftpboot/zImage:
loading raw binary to 0x81000000 (ram) len 001b4ab4:
...............................................................................e
file loaded
losh> ls
R : load 1788596
D : tftp 0
D : etc 0
D : dev 0
losh> exec 0x800d03a8 -

*****************************************************************

LogicLoader

(c) Copyright 2002-2006, Logic Product Development, Inc.
All Rights Reserved.
Version 2.4.0-IMX31_10 0001
*****************************************************************

losh> ls
D : tftp 0
D : etc 0
D : dev 0
losh>


I am following the instructions from the post: http://tdg.logicpd.com/viewtopic.php?f=29&t=1074

Thanks

ecastelo-

The exec - t option is enabled in LoLo 2.4.0.
Type help exec for examples.

Thanks

The kernel would not boot. It would hang on the USB_CLK line whine uncompressing Linux. Using Linux 2.6.19.2
So i decided to give another try compiling the 2.6.22.6. Here is where my kernel stops compiling. I apply the patches and run ltib again. I select all the settings ( imx31lite, smsc ...)
Then it starts to compiles and i get the same error:

It's long sorry

+ '[' '!' -f config/platform/imx31ads/.config -a -f config/platform/imx31ads/defconfig ']'
+ '[' -n '' ']'
+ '[' -n '' ']'
+ cd config/platform/imx31ads
+ mconf main.lkc
#
# using defaults found in .config
#


*** End of configuration.
*** Check the top-level Makefile for additional configuration options.

+ cp .config defconfig.dev

Processing platform: Freescale IMX31 ADS reference board
==========================================================
using config/platform/imx31ads/.config

Processing: fake-provides
===========================

Processing: kernel-2.6.22-mx
==============================

Cowardly refusing to clobber existing directory:
/usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux-2.6.22
Remove this by hand if you really want to rebuild this package from scratch

scbuild/scdeploy already unpacked package

Processing: kernel-2.6.22-mx
==============================
rpmbuild --dbpath /usr/local/ltib/ltib-imx31ads-20071008/rpmdb --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /usr/local/ltib/ltib-imx31ads-20071008/rpm' --define '_prefix /usr' --define '_tmppath /usr/local/ltib/ltib-imx31ads-20071008/tmp' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bc --short-circuit /usr/local/ltib/ltib-imx31ads-20071008/tmp/kernel-2.6.22-mx.spec
Executing(%build): /bin/sh -e /usr/local/ltib/ltib-imx31ads-20071008/tmp/rpm-tmp.10740
+ umask 022
+ cd /usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD
+ cd linux-2.6.22
+ '[' -n linux-2.6.22 ']'
+ rm -f /usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux
+ ln -s linux-2.6.22 /usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux
+ KSRC_DIR=/usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux-2.6.22
+ : arm
+ : /usr/bin/gcc -B/usr/bin//
+ : linux-2.6.22-mx31ads.config
+ : /usr/local/ltib/ltib-imx31ads-20071008/config/platform/imx31ads
+ : /usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux-2.6.22
+ cd /usr/local/ltib/ltib-imx31ads-20071008/rpm/BUILD/linux-2.6.22
++ eval echo
+++ echo
+ KBOUT=
+ KBOUT=.
+ '[' . '!=' . ']'
+ test -d .
+ case $LINTARCH in
+ KTARG=zImage
+ SYSCFG_KTARG=zImage
+ for CFG in '"$PLATFORM_PATH/${PKG_KERNEL_PRECONFIG}.dev"' '"$PLATFORM_PATH/$PKG_KERNEL_PRECONFIG"' '"$KSRC_DIR/arch/$GNUTARCH/configs/$PKG_KERNEL_PRECONFIG"' '"$KSRC_DIR/arch/$LINTARCH/configs/$PKG_KERNEL_PRECONFIG"' notfound
+ '[' -f /usr/local/ltib/ltib-imx31ads-20071008/config/platform/imx31ads/linux-2.6.22-mx31ads.config.dev ']'
+ cp -f /usr/local/ltib/ltib-imx31ads-20071008/config/platform/imx31ads/linux-2.6.22-mx31ads.config.dev ./.config
+ break
+ '[' '!' -f ./.config ']'
+ grep -q CONFIG_PPC_MERGE=y ./.config
+ '[' -n '' ']'
+ '[' -n y -o -n '' ']'
+ make ARCH=arm CROSS_COMPILE= 'HOSTCC=/usr/bin/gcc -B/usr/bin//' menuconfig
scripts/kconfig/mconf arch/arm/Kconfig


*** End of Linux kernel configuration.
*** Execute 'make' to build the kernel or try 'make help'.

+ cp -f ./.config /usr/local/ltib/ltib-imx31ads-20071008/config/platform/imx31ads/linux-2.6.22-mx31ads.config.dev
+ '[' . '!=' . ']'
+ '[' '%{kernel_series}' = 2.4 ']'
+ make ARCH=arm CROSS_COMPILE= 'HOSTCC=/usr/bin/gcc -B/usr/bin//' zImage
scripts/kconfig/conf -s arch/arm/Kconfig
*
* Restart config...
*
*
* MX3 Options
*
Support MX31LITE (logicpd lite kit) platforms (MACH_MX31LITE) [Y/n/?] (NEW) Y
Support MX31ADS platforms (MACH_MX31ADS) [Y/n/?] y
Enter Doze mode during idle (MX3_DOZE_DURING_IDLE) [N/y/?] n
Use SDMA API (MXC_SDMA_API) [Y/n/?] y
MXC NFC Hardware Version 1 (ARCH_MXC_HAS_NFC_V1) [Y/n/?] y
MXC NFC Hardware Version 2 (ARCH_MXC_HAS_NFC_V2) [Y/n/?] y
*
* Ethernet (10 or 100Mbit)
*
Ethernet (10 or 100Mbit) (NET_ETHERNET) [Y/n/?] y
Generic Media Independent Interface device support (MII) [Y/m/?] y
3COM cards (NET_VENDOR_3COM) [N/y/?] n
Western Digital/SMC cards (NET_VENDOR_SMC) [N/y/?] n
SMC 91C9x/91C1xxx support (SMC91X) [N/m/y/?] n
SMSC LAN911x/LAN921x families embedded ethernet support (SMSC911X) [N/m/y/?] (NEW) y
DM9000 support (DM9000) [N/m/y/?] n
Racal-Interlan (Micom) NI cards (NET_VENDOR_RACAL) [N/y/?] n
AT1700/1720 support (EXPERIMENTAL) (AT1700) [N/m/y/?] n
DEPCA, DE10x, DE200, DE201, DE202, DE422 support (DEPCA) [N/m/y/?] n
HP 10/100VG PCLAN (ISA, EISA, PCI) support (HP100) [N/m/y/?] n
Other ISA cards (NET_ISA) [N/y/?] n
EISA, VLB, PCI and on board controllers (NET_PCI) [Y/n/?] y
Ansel Communications EISA 3200 support (EXPERIMENTAL) (AC3200) [N/m/y/?] n
Apricot Xen-II on board Ethernet (APRICOT) [N/m/y/?] n
CS89x0 support (CS89x0) [Y/n/m/?] y
#
# configuration written to .config
#
CHK include/linux/version.h
SYMLINK include/asm-arm/arch -> include/asm-arm/arch-mxc
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
CALL scripts/checksyscalls.sh
<stdin>:91:1: warning: "__IGNORE_sync_file_range" redefined
In file included from <stdin>:2:
include/asm/unistd.h:444:1: warning: this is the location of the previous definition
<stdin>:1097:2: warning: #warning syscall fadvise64 not implemented
<stdin>:1265:2: warning: #warning syscall migrate_pages not implemented
<stdin>:1321:2: warning: #warning syscall pselect6 not implemented
<stdin>:1325:2: warning: #warning syscall ppoll not implemented
<stdin>:1365:2: warning: #warning syscall epoll_pwait not implemented
CHK include/linux/compile.h
LD arch/arm/mach-mx3/built-in.o
arch/arm/mach-mx3/mx31lite.o: In function `board_get_ckih_rate':
mx31lite.c:(.text+0x10): multiple definition of `board_get_ckih_rate'
arch/arm/mach-mx3/mx31ads.o:mx31ads.c:(.text+0x10): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `board_get_ckih_rate' changed from 48 in arch/arm/mach-mx3/mx31ads.o to 24 in arch/arm/mach-mx3/mx31lite.o
arch/arm/mach-mx3/mx31lite.o: In function `get_cpu_wp':
mx31lite.c:(.text+0x28): multiple definition of `get_cpu_wp'
arch/arm/mach-mx3/mx31ads.o:mx31ads.c:(.text+0x90): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `get_cpu_wp' changed from 56 in arch/arm/mach-mx3/mx31ads.o to 32 in arch/arm/mach-mx3/mx31lite.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `extuart_intr_setup':
mx31lite_gpio.c:(.text+0x98): multiple definition of `extuart_intr_setup'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x9c): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_lcd_inactive':
mx31lite_gpio.c:(.text+0x48): multiple definition of `gpio_lcd_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x10): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_lcd_inactive' changed from 28 in arch/arm/mach-mx3/mx31ads_gpio.o to 16 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sensor_reset':
mx31lite_gpio.c:(.text+0x88): multiple definition of `gpio_sensor_reset'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x70): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_sensor_reset' changed from 44 in arch/arm/mach-mx3/mx31ads_gpio.o to 16 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sdhc_active':
mx31lite_gpio.c:(.text+0x1b44): multiple definition of `gpio_sdhc_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1688): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbh2_inactive':
mx31lite_gpio.c:(.text+0x1ca4): multiple definition of `gpio_usbh2_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1820): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbh2_inactive' changed from 360 in arch/arm/mach-mx3/mx31ads_gpio.o to 580 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `sdhc_get_card_det_status':
mx31lite_gpio.c:(.text+0x24a4): multiple definition of `sdhc_get_card_det_status'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x24c0): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_ata_inactive':
mx31lite_gpio.c:(.text+0x16dc): multiple definition of `gpio_ata_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1314): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_ata_inactive' changed from 528 in arch/arm/mach-mx3/mx31ads_gpio.o to 772 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_owire_inactive':
mx31lite_gpio.c:(.text+0x11d0): multiple definition of `gpio_owire_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xf14): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbh1_active':
mx31lite_gpio.c:(.text+0x15a4): multiple definition of `gpio_usbh1_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1db8): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbh1_active' changed from 360 in arch/arm/mach-mx3/mx31ads_gpio.o to 312 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_uart_active':
mx31lite_gpio.c:(.text+0xd88): multiple definition of `gpio_uart_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xbd8): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_uart_active' changed from 688 in arch/arm/mach-mx3/mx31ads_gpio.o to 568 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbh2_active':
mx31lite_gpio.c:(.text+0x1f20): multiple definition of `gpio_usbh2_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1ad8): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbh2_active' changed from 736 in arch/arm/mach-mx3/mx31ads_gpio.o to 524 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_lcd_active':
mx31lite_gpio.c:(.text+0x6dc): multiple definition of `gpio_lcd_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x4e0): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_lcd_active' changed from 548 in arch/arm/mach-mx3/mx31ads_gpio.o to 536 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `extuart_intr_cleanup':
mx31lite_gpio.c:(.text+0xbc): multiple definition of `extuart_intr_cleanup'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xc0): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_owire_active':
mx31lite_gpio.c:(.text+0x1ee8): multiple definition of `gpio_owire_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x17e8): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_i2c_active':
mx31lite_gpio.c:(.text+0xa44): multiple definition of `gpio_i2c_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x7f4): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_spi_inactive':
mx31lite_gpio.c:(.text+0x38): multiple definition of `gpio_spi_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x0): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_keypad_active':
mx31lite_gpio.c:(.text+0xc38): multiple definition of `gpio_keypad_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xa88): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sdhc_inactive':
mx31lite_gpio.c:(.text+0x19e0): multiple definition of `gpio_sdhc_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1524): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbh1_inactive':
mx31lite_gpio.c:(.text+0xd0): multiple definition of `gpio_usbh1_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xd4): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sensor_active':
mx31lite_gpio.c:(.text+0x68): multiple definition of `gpio_sensor_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x37c): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_sensor_active' changed from 356 in arch/arm/mach-mx3/mx31ads_gpio.o to 16 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_spi_active':
mx31lite_gpio.c:(.text+0x254c): multiple definition of `gpio_spi_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x898): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_spi_active' changed from 320 in arch/arm/mach-mx3/mx31ads_gpio.o to 340 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `config_uartdma_event':
mx31lite_gpio.c:(.text+0x2460): multiple definition of `config_uartdma_event'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x228c): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `sdhc_init_card_det':
mx31lite_gpio.c:(.text+0x1188): multiple definition of `sdhc_init_card_det'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xecc): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `extuart_intr_clear':
mx31lite_gpio.c:(.text+0xac): multiple definition of `extuart_intr_clear'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xb0): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbotg_fs_inactive':
mx31lite_gpio.c:(.text+0x280): multiple definition of `gpio_usbotg_fs_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xf4): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbotg_fs_inactive' changed from 16 in arch/arm/mach-mx3/mx31ads_gpio.o to 276 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_pcmcia_inactive':
mx31lite_gpio.c:(.text+0xe0): multiple definition of `gpio_pcmcia_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x104): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_pcmcia_inactive' changed from 44 in arch/arm/mach-mx3/mx31ads_gpio.o to 416 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_pcmcia_active':
mx31lite_gpio.c:(.text+0xfe8): multiple definition of `gpio_pcmcia_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xf38): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_pcmcia_active' changed from 456 in arch/arm/mach-mx3/mx31ads_gpio.o to 416 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbotg_hs_inactive':
mx31lite_gpio.c:(.text+0x11f4): multiple definition of `gpio_usbotg_hs_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0xe4): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbotg_hs_inactive' changed from 16 in arch/arm/mach-mx3/mx31ads_gpio.o to 432 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_uart_inactive':
mx31lite_gpio.c:(.text+0x26a0): multiple definition of `gpio_uart_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x2530): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_uart_inactive' changed from 528 in arch/arm/mach-mx3/mx31ads_gpio.o to 472 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `slcd_gpio_config':
mx31lite_gpio.c:(.text+0x514): multiple definition of `slcd_gpio_config'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x22d0): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `slcd_gpio_config' changed from 496 in arch/arm/mach-mx3/mx31ads_gpio.o to 456 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sensor_select':
mx31lite_gpio.c:(.text+0x58): multiple definition of `gpio_sensor_select'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x2c): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_sensor_select' changed from 68 in arch/arm/mach-mx3/mx31ads_gpio.o to 16 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_ata_active':
mx31lite_gpio.c:(.text+0x212c): multiple definition of `gpio_ata_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1f20): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_ata_active' changed from 876 in arch/arm/mach-mx3/mx31ads_gpio.o to 820 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbotg_hs_active':
mx31lite_gpio.c:(.text+0x13a4): multiple definition of `gpio_usbotg_hs_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1100): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbotg_hs_active' changed from 532 in arch/arm/mach-mx3/mx31ads_gpio.o to 512 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_activate_audio_ports':
mx31lite_gpio.c:(.text+0x8f4): multiple definition of `gpio_activate_audio_ports'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x704): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_usbotg_fs_active':
mx31lite_gpio.c:(.text+0x394): multiple definition of `gpio_usbotg_fs_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1e4): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_usbotg_fs_active' changed from 408 in arch/arm/mach-mx3/mx31ads_gpio.o to 384 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_i2c_inactive':
mx31lite_gpio.c:(.text+0x9a4): multiple definition of `gpio_i2c_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x7b4): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_i2c_inactive' changed from 64 in arch/arm/mach-mx3/mx31ads_gpio.o to 160 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_sensor_inactive':
mx31lite_gpio.c:(.text+0x78): multiple definition of `gpio_sensor_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x1988): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_sensor_inactive' changed from 336 in arch/arm/mach-mx3/mx31ads_gpio.o to 16 in arch/arm/mach-mx3/mx31lite_gpio.o
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_pmic_active':
mx31lite_gpio.c:(.text+0x24dc): multiple definition of `gpio_pmic_active'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x24f8): first defined here
arch/arm/mach-mx3/mx31lite_gpio.o: In function `gpio_keypad_inactive':
mx31lite_gpio.c:(.text+0xae8): multiple definition of `gpio_keypad_inactive'
arch/arm/mach-mx3/mx31ads_gpio.o:mx31ads_gpio.c:(.text+0x9d8): first defined here
arm-none-linux-gnueabi-ld: Warning: size of symbol `gpio_keypad_inactive' changed from 176 in arch/arm/mach-mx3/mx31ads_gpio.o to 336 in arch/arm/mach-mx3/mx31lite_gpio.o
make[1]: *** [arch/arm/mach-mx3/built-in.o] Error 1
make: *** [arch/arm/mach-mx3] Error 2
error: Bad exit status from /usr/local/ltib/ltib-imx31ads-20071008/tmp/rpm-tmp.10740 (%build)


RPM build errors:
Bad exit status from /usr/local/ltib/ltib-imx31ads-20071008/tmp/rpm-tmp.10740 (%build)
Build time for kernel-2.6.22-mx: 469 seconds

Failed building kernel-2.6.22-mx



Can anyone help me get past this point.
Thanks