I have a AM3517 EVM and am following the Linux User Guide Software Documentation by Logic PD. I got stuck attempting to boot from NFS (see section 4.4)

I am new to Linux, so my problem could be on my Ubuntu 11.04 PC side of network too.

Here is the last part of the boot output:

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, id=7c0f1)
Sending DHCP requests .
PHY: ffffffff:00 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.163
IP-Config: Complete:
device=eth0, addr=192.168.0.163, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.163, domain=internal, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.150, rootpath=
Looking up port of RPC 100003/2 on 192.168.0.150
Looking up port of RPC 100005/1 on 192.168.0.150
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing init memory: 164K
INIT: version 2.86 booting
Please wait: booting...
Starting udev
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): recovery complete
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
EXT3-fs (mmcblk0p3): using internal journal
EXT3-fs (mmcblk0p3): recovery complete
EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
Remounting root file system...
Caching udev devnodes
Populating dev cachemv: cannot rename '/tmp/devices': No such file or directory
root: mount: mounting rootfs on / failed: No such file or directory
root: mount: mounting usbfs on /proc/bus/usb failed: No such file or directory
NOT configuring network interfaces: / is an NFS mount
Wed Sep 7 09:42:00 UTC 2011
INIT: Entering runlevel: 5
Starting telnet daemon.
Starting syslogd/klogd: done

And this is where it hangs - I believe it has something to do with where and how the rootfs is setup on the PC, but I am not sure how to correct the problem.

The AM3517 EVM printenv is:

bootdelay=10
baudrate=115200
loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
loaduimage=fatload mmc 0 ${loadaddr} uImage
mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr} 280000 400000; bootm ${loadaddr}
dieid#=0e24000100000000015da3960e012006
ethact=DaVinci EMAC
ethaddr=00:08:00:28:00:0f:25:9b
bootfile=uImage
loadaddr=0x83000000
console=ttyS2,115200n8
rootpath=/opt/nfs-exports/am3517
nfsoptions=,wsize=1500,rsize=1500
loadnet=tftpboot ${loadaddr} ${serverip}:${bootfile};
loadfl=nand device 0; nand read ${loadaddr} 0x280000 0x500000;
loadmmc=mmc init; fatload mmc 0 ${loadaddr} ${bootfile};
nandargs=setenv bootargs console=${console} root=/dev/mtdblock4 rw rootfstype=jffs2 ${otherbootargs};
mmcargs=setenv bootargs console=${console} root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait ${otherbootargs};
nfsargs=setenv bootargs console=${console} root=/dev/nfs rw nfsroot=${serverip}:${rootpath}${nfsoptions} ip=dhcp ${otherbootargs};
stdin=serial
stdout=serial
stderr=serial
otherbootargs=bootwait=4
bootargs=console=ttyS2,115200n8 root=/dev/nfs rw nfsroot=192.168.0.150:/opt/nfs-exports/am3517,wsize=1500,rsize=1500 ip=dhcp bootwait=4
filesize=2338E4
fileaddr=83000000
netmask=255.255.255.0
ipaddr=192.168.0.200
serverip=192.168.0.150

Can anyone see what I have wrong? Is there any other information which would be helpful to check?
Thank You
-Daren