Create Account
Search
You are here: TDG Forum  >>  Board Support Packages (BSP)  >>  Linux  >>  What do I need to do to get u-boot on these devices?

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 10 Dec 2013 11:57 AM by  steven.eckhoff
What do I need to do to get u-boot on these devices?
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
steven.eckhoff
Basic Member
Basic Member
Posts:192


--
10 Dec 2013 11:57 AM
    Q: I have a tool flow that uses u-boot to flash and program the DM3730 torpedo wireless SOM.
    The devices that I purchased from Digikey boot to the losh prompt.
    What do I need to do to get u-boot on these devices? I tried to follow Application Note 460 but I can find x-load.bin.ift. When I load u-boot (step 3.2) I cant get beyond the 3.2.3. When I run exec it comes back with the losh prompt.

    Where and how do I reflash these devices to a u-boot prompt?

    A: That application note applies to OMAP35x, you stated that you are using DM3730. Which SOM are you using? If you are using DM3730 see the following documents. 

    [1] http://support.logicpd.co...d=0&EntryId=1405

    [2] http://support.logicpd.co...d=0&EntryId=1409

    [3] http://support.logicpd.co...d=0&EntryId=1392
    You are not authorized to post a reply.

    Forums Board Support Packages (BSP) Linux