Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 21 Aug 2007 03:30 PM by  erik.r@logicpd.com
3.6" Schematic
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages

spewl



New Member


Posts:
New Member


--
23 Mar 2007 11:00 AM
    I notice a difference between the schematic and the actual unit. The schematic shows J3 pin 16 going to G2. on the actual board you have this tied to J3 pin 15 as well which is GND. which way is correct? What is the reason for this?

    erik.r@logicpd.com



    New Member


    Posts:
    New Member


    --
    21 Aug 2007 03:30 PM
    Posted By spewl on 23 Mar 2007 11:0 AM
    I notice a difference between the schematic and the actual unit. The schematic shows J3 pin 16 going to G2. on the actual board you have this tied to J3 pin 15 as well which is GND. which way is correct? What is the reason for this?




    Spewl,

    When referring to the board, please use the sticker with bar code that has a 100xxxx Rev X on it. With that number we will be able to determine exactly what revision of adaptor board you have and be able to answer your question correctly.

    Thanks,

    Erik
    You are not authorized to post a reply.