Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 06 Sep 2010 04:49 AM by  steveli
LH79525 - JTAG Communication using IAR
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
steveli
New Member
New Member
Posts:


--
06 Sep 2010 04:49 AM
    Hi,

    We have a Board on LH79525 and using IAR debugger. When we tried to download code using J-Link, we are getting some warning messages as shown below :
    Tue Aug 31 16:06:53 2010: JLINK command: ProjectFile = D:\Project 350\Firmware\100826_Project350_CSDES Program\settings\
    BasicLcd_DebugRunFromFlash.jlink, return = 0
    Tue Aug 31 16:06:53 2010: JLINK command: device = LH79525, return = 0
    Tue Aug 31 16:06:53 2010: DLL version: V4.14i, compiled Aug 12 2010 20:19:20
    Tue Aug 31 16:06:53 2010: Firmware: J-Link ARM V8 compiled Aug 12 2010 19:35:38
    Tue Aug 31 16:06:53 2010: JTAG speed is initially set to: 32 kHz
    Tue Aug 31 16:06:53 2010: Initial reset was performed
    Tue Aug 31 16:06:53 2010: TotalIRLen = 4, IRPrint = 0x01
    Tue Aug 31 16:06:53 2010: Found 1 JTAG device, Total IRLen = 4:
    Tue Aug 31 16:06:53 2010: #0 Id: 0x0F0F0F0F, IRLen: 4, IRPrint: 0x1 ARM7TDMI Core
    Tue Aug 31 16:06:53 2010: J-Link found 1 JTAG device(s). ARM core Id: F0F0F0F ARM7
    Tue Aug 31 16:06:53 2010: Device at TAP0 selected
    Tue Aug 31 16:06:54 2010: RTCK is not connected
    Tue Aug 31 16:06:54 2010: Auto JTAG speed: 8000 kHz
    Tue Aug 31 16:06:54 2010: 7218 bytes downloaded and verified (11.00 Kbytes/sec)
    Tue Aug 31 16:06:54 2010: Warning:
    Verify error at address 0x44000044, target byte: 0xFF, byte in file: 0x18
    Tue Aug 31 16:06:54 2010: Warning:
    Verify error at address 0x44000045, target byte: 0xFF, byte in file: 0xF0
    Tue Aug 31 16:06:54 2010: Warning:
    Verify error at address 0x44000046, target byte: 0xFF, byte in file: 0x9F
    ........
    .........
    ..........
    Tue Aug 31 16:06:54 2010: Warning: Too many verify errors, only the first 200 are displayed
    Tue Aug 31 16:06:55 2010: Warning: There were warnings during download, see Log Window
    Tue Aug 31 16:06:55 2010: Loaded debugee: D:\Project 350\Firmware\100826_Project350_CSDES Program\DebugRunFromFlash\Exe\BasicLcd.out
    Tue Aug 31 16:06:55 2010: Target reset


    Also following are the memory we are usingon our PCB :
    External Static Memory – 1Mbytes
    Chip selection – nCS1
    Start Address = 0x44000044;
    End Address = 0x440FFFFF;

    External SDRAM - 2MBytes
    Chip selection – nSDCS0
    Start Address = 0x20000000;
    End Address = 0x201FFFFF;

    We verified the supply for both RAM and ROM. Also, we are not using any flash loader file (IAR --à Options---à Debugger -à Download – “Use flash loaders” ). If it is required, please suggest us how to create this file for our PCB –LH79525.

    Please reply as soon as possible.

    Thanks,
    Steve
    You are not authorized to post a reply.