Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 05 Dec 2007 08:57 AM by  colin324
Adding extra serial ports using quad UART device
 0 Replies
You are not authorized to post a reply.
Author Messages
New Member
New Member

05 Dec 2007 08:57 AM
    I have added 4 serial ports to the LH79254 card, using the ST16C554A Quad UART. Using SLOW_nMCS, nIOWR, nIORD, address and data lines I can sometimes get data onto the scratchpad in the UART, sometimes I can read it back too. The issue I have is that sometimes both the nIOWR and nIORD lines seem to both occur together. Do I need any further control lines ? I am using the memory area 0x4900 0000 – 0x49FF FFFF, as the technical info states for my IO.
    You are not authorized to post a reply.