Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 15 Jun 2004 06:02 AM by  d99scox_dtek@yahoo.com
Wiggler problems
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
peter_vc
New Member
New Member
Posts:


--
17 Feb 2004 10:09 PM
    I've downloaded the free JTAG software from Macraigor, set my parallel port to both standard and EPP in the CMOS, connected a full 25pin straight through cable to the Wiggler, ensured my jumper settings are correct on the SDK board but the software keeps giving me a "cable disconnected" error. The LED's flash on the board untill I try to connect to it from the software, then they stop flashing and Status LED 1 remains lit. If I then hit the reset button, all the LED's remain off and I gotta pull the plug. Anyone have any suggestions? Thanks.
    Anonymous
    Posts:


    --
    23 Feb 2004 01:27 PM
    Hello Peter_vc,

    Thanks for your question. Unfortunately I and others at Logic have also experienced the same inconsistent results with Macraigor's software. One thing that sometimes works is to toggle debugger settings. For example, select 'Raven', etc, to try and clear things out. Rebooting the host computer also helps.

    We recommend downloading Cygwin and working through the gdb toolset. Instructions are available from the LH79520-10 download site, http://downloads.logicpd.com/eps/products/. Download the document "readme_rebuild_bolo.rtf". It contains the necessary instructions.

    Best Regards,
    Andrew Wawra
    Logic Product Development
    d99scox_dtek@yahoo.com
    New Member
    New Member
    Posts:


    --
    15 Jun 2004 06:02 AM
    Hi

    I've accidently erased the flash and need to restore bolo/lolo using wiggler. I cannot find the instructions on how to do this, the document/install instructions you mention in the previous message seems to have disappeared from the download site. Could you please offer me some assistance in this matter?

    Best regards,
    Johan
    You are not authorized to post a reply.