Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH75401 Card Engine and Development Kit  >>   LH75401-10 2MB SRAM Hardware Upgrade.

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 10 Nov 2003 03:14 PM by  Anonymous
LH75401-10 2MB SRAM Hardware Upgrade.
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
Anonymous
Posts:


--
10 Nov 2003 03:14 PM
    The LH75401-10 card engine can support up to 2MB SRAM (stock is 512 KB). Changes in Hardware and Software must be made to account for this.

    Hardware:
    If you add additional SRAM to the card engine please refer to the LH75401-10 card engine schematics (pg. 4) for memory location and jumper setting changes.

    For Example, if you want to upgrade to 2MB:
    1. Populate U5, U6, U20, U21 with 512 KB SRAM, (Part number
    IDT71V416SA15PH)
    2. change JP1 and JP2 jumper settings to both '+', (as shown in 'SRAM
    DENSITY CONFIGURATION BITS ' Table on pg. 4 of schematics)

    Software:
    The Bolo/Lolo that shipped with the LH75401-10 Card engine is designed to support 512KB SRAM. It will not support the additional SRAM.

    Configure your software to account for the additional SRAM.

    Regards,
    Andrew Wawra
    Logic Product Development
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH75401 Card Engine and Development Kit