Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A404 Card Engine and Development Kit  >>   Application with WinCE 5.0 Sample Development Image?

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 18 Jan 2005 04:16 PM by  Anonymous
Application with WinCE 5.0 Sample Development Image?
 3 Replies
Sort:
You are not authorized to post a reply.
Author Messages
ggirzon
New Member
New Member
Posts:


--
17 Nov 2004 01:44 PM
    Is there a way to download (eg., using Activesync) and run an actual application on the pre-built WinCE 5.0 Sample Development Image? I have been able to load NK.BIN from CF card and get a WinCE startup window. Should Activesync run using the Client USB port? (Does not on my host). I am looking for a way using EVC++ but will consider Platform Builder.

    Thanks,

    Gary
    Anonymous
    Posts:


    --
    17 Nov 2004 05:11 PM
    Gary,

    Yes, activesync will run on the Client USB Port. The USB Host port is for input devices like a keyboard, mouse or even a USB disk drive. Make sure that you have the USB Workstation driver installed on your system as well. Here's a link to it:

    https://www.logicpd.com/downloads/327/USBF_Work_Station_Driver.zip
    ggirzon
    New Member
    New Member
    Posts:


    --
    18 Nov 2004 01:20 PM
    Thanks for the link! Activesync now works and I can browse the SDK. I still have a couple of questions

    - neither the touchscreen nor USB mouse works with the Sample Development Image. Are these items built into the image and do I need to specify a kernel parameter, or are not available?

    -how do I configure eVC++ / Platform Manager to see SDK with this image? I have built an app using the Standard 5.0 SDK (and Pocket PC SDK). How do I target the SDK?

    Gary
    Anonymous
    Posts:


    --
    18 Jan 2005 04:16 PM
    Gary,

    Quote:
    neither the touchscreen nor USB mouse works with the Sample Development Image. Are these items built into the image and do I need to specify a kernel parameter, or are not available?


    At the time that you had this image the touch driver and USB Hosting driver were still under development. They have since been released and added to the Sample Dev Image for the A404. Please go to the following link to download this updated image.

    http://www.logicpd.com/auth/downloads/LH7A404/

    Quote:
    how do I configure eVC++ / Platform Manager to see SDK with this image? I have built an app using the Standard 5.0 SDK (and Pocket PC SDK). How do I target the SDK?


    Please refer to the "Zoom Starter Development Kit WindowsCE Evaluation Guide" for this information. It has been written to provide instruction for using the WinCE 5.0 Sample Development Image for the LH7A404.
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A404 Card Engine and Development Kit