Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 19 Oct 2010 08:44 PM by  loginreg@gmail.com
I2C2 works?
 1 Replies
Sort:
You are not authorized to post a reply.
Author Messages
jkg
New Member
New Member
Posts:


--
04 Aug 2010 07:01 AM
    Hello,

    Has anyone had experience with I2C2 on the SOMOMAP3530?

    I seem to have SDA stuck high. In addition to the 4.7K pup shown on the torpedo schematic, I have a 3K on our board, and have the bus connected to a tvp5150.

    I see lots of issues with I2C2 on the beagle, and have verified my mux pins as:

    MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\
    MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\

    Both of which read back as 0x118.

    Thanks,
    Joel.
    loginreg@gmail.com
    New Member
    New Member
    Posts:


    --
    19 Oct 2010 08:44 PM
    The I2C2 interface does not appear to have any problem on other boards. The Beagle board works fine as long as extra pull up resistors are soldered in.

    Remember that the IO is 1.8v.
    You are not authorized to post a reply.