Create Account
Search
You are here: TDG Forum  >>  NXP SOMs and Development Kits  >>  LH7A400 Card Engine and Development Kit  >>   Display Support on LH7A400

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 13 Jul 2005 04:07 PM by  mikea@logicpd.com
Display Support on LH7A400
 2 Replies
Sort:
You are not authorized to post a reply.
Author Messages
cmdhus
New Member
New Member
Posts:


--
08 Jul 2005 11:28 AM
    Just got a LH7A400 -

    Even though the manual says that the board support LCD-5.7-QVGA-10,
    however when I type in

    video-open 3 16

    I get the following error

    Error, found no suitable display drivers
    Error, couldn't get a display handle

    The versio of Lolo on the board is Version_release_1=2-pre1.2.5
    CPLD_CE_REG_REVISION : 0x34<rev:b>

    Do I need to load in a new version: the release note for loading the new logicloader is not clear. Can someone post clearly how to load in the new loader (step by step) plus which files - I get 5 files 3 elf, 1 upd and 1 raw.

    Thanks in advance for any help.
    Anonymous
    Posts:


    --
    08 Jul 2005 02:47 PM
    Hello,

    Yes you will need to update to latest LogicLoader version which has support for the 5.7" display kit built in. This can be found at the following link:

    http://www.logicpd.com/do...oads/115/1002302.zip

    Unzip the files in the downloadable to a location on your computer.

    1) type 'load elf' at the losh prompt

    2) Go to "Send File" in TeraTerm

    3) Select the Lolo file entitled "1002302_lolo.elf"

    4) When it's done loading the file, type 'burn'

    5) Reset the kit

    Please post back to this thread if you have further questions regarding this.
    mikea@logicpd.com
    New Member
    New Member
    Posts:


    --
    13 Jul 2005 04:07 PM
    Once you have the updated LogicLoader (2.0.2 is the newest as of this post) you can use the 'video-open 1 16' command.

    If you need to check the available video modes, you can use the following:

    losh> help video-open

    Thanks,
    -Mike A.
    You are not authorized to post a reply.

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit