Go to previous topic
Go to next topic
Last Post 22 Jun 2015 07:01 AM by  Adam Ford
OMAP-L138 SOM-M1 Module Bus Connectors
 3 Replies
Author Messages
Rodney Wong
New Member
New Member
Posts:5


--
17 Jun 2015 04:55 PM

    The module bus connectors J1, J2, and J3 are some distance away from each other. Does anyone know what is that distance from their center points?

    Regards,

    - Rodney
    Adam Ford
    Advanced Member
    Advanced Member
    Posts:794


    --
    18 Jun 2015 07:19 AM
    The Hardware specification has a mechanical drawing that shows the spacing of J1, J2 and J3.

    http://support.logicpd.co...rtalid=0&EntryId=748


    If you cannot open the link, you may need to log into our support site first.

    adam
    Rodney Wong
    New Member
    New Member
    Posts:5


    --
    19 Jun 2015 05:44 PM

    Found the dimensions. Thanks Adam.

     

    - RW
    Adam Ford
    Advanced Member
    Advanced Member
    Posts:794


    --
    22 Jun 2015 07:01 AM
    Fantastic! If you'd like us to review a schematic before you do your board layout, let us know. We have various levels of support contacts that we can setup. http://support.logicpd.co...SupportPackages.aspx

    Having us help identify issues before you build can save time money in rework if you're interested in our services.

    Good luck on your project.

    adam

    Forums Texas Instruments SOMs and Development Kits OMAP-L138 eXperimenter Kit
    ---