First time programming a ARM/DSP chip. Got a OMAP-L138 EVM development Kit from a college and am trying get some of the basic stuff from the users Guide working.
I get the following when trying to connect to the OMAP-L138.
C674X_0: Error connecting to the target: (Error -1180 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.507.0)
Tried reflashing with the instructions found here:
http://processors.wiki.ti...d_Boot_Utils_Package
This seemed to flash the chip and returned no errors but still getting the same error message when i try to connect with CCS.
Any help would be appreciated.
The end goal is to make a simple TCPIP client, but i need to be able to connect to the board first.