Hello
I have a question on the OMAP35x SOM-LV board. We are using the board in our design and I need to find out about a couple signals. According to the OMAP 35x SOM-LV Hardware Spec the following signals are used with for the Camera Sensor Interface, CSI_D0..D11, CSI_VSYNC and CSI_HSYNC. We don't need the Camera Interface but I wanted to know if I can use this pins for GPIO. According to the OMAP Datasheet these pins have dual functions and can be defined for GPIO in the register settings. So can I redefine them as GPIO or does that create a conflict or problem on the SOM board? We will be used the SOM board with WinCE.
Thanks
Gary
|