HI
I am working Enable bleuetooth on DM3730 Torpedo + Wireless System on Module (SOM) WL1283 + Zoom DM3730 Torpedo
I booted with linux(Used BSP-2.4-2 pre built images) , While loading btwilink.ko module i am getting failed to read local ver
I followed following procedure
#insmod st_drv.ko
#/home/root/wl12xx/uim &
#insmod btwilink
DM-37x# insmod bluetooth/btwilink.ko
[ 250.374084] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 250.394805] (stc): st_register(2)
[ 250.398437] (stc): chnl_id list empty :2
[ 250.402770] (stk) : st_kim_start
[ 250.511840] (stk) :ldisc_install = 1uim: Inside mainuim: Inside st_uart_configuim:install set to 1
uim:opening /dev/ttyO1, while already open
DM-37x# uim:cleanup
uim: Inside set_baud_rateuim: set_baud_rate() do
[ 250.575805] (stc): st_tty_open ne
[ 250.582031] (stk) : line discipline installed uim: Installed N_TI_WL Line displine
[ 251.390563] (stk) : waiting for ver info- timed out
[ 251.395874] (stk) :kim: failed to read local ver
[ 251.400878] (stk) :download firmware failed
[ 251.405303] (stk) :ldisc_install = 0
[ 251.514862] (stk) :ldisc_install = 1uim: Inside st_uart_configuim:install set to 1
uim:opening /dev/ttyO1, while already open
uim:cleanup
[ 252.515533] (stk) :line disc installation timed out
[ 252.520812] (stk) :ldisc_install = 0
[ 252.630371] (stk) :ldisc_install = 1
[ 253.632720] (stk) :line disc installation timed out
[ 253.637969] (stk) :ldisc_install = 0
[ 253.747589] (stk) :ldisc_install = 1
[ 254.749969] (stk) :line disc installation timed out
[ 254.755249] (stk) :ldisc_install = 0
[ 254.864746] (stk) :ldisc_install = 1
[ 255.867095] (stk) :line disc installation timed out
[ 255.872375] (stk) :ldisc_install = 0
[ 255.981964] (stk) :ldisc_install = 1
[ 256.984313] (stk) :line disc installation timed out
[ 256.989532] (stk) :ldisc_install = 0
[ 256.993499] ti_st_open: st_register failed -22
DM-37x# /home/root/wl12xx/uim &[ 281.524658] (stc): st_tty_close uim: Inside set_
[ 281.534362] (stc): st_tty_open baud_rateuim: set_baud_rate() do
[ 281.540985] (stc): st_tty_close ne
uim: Installed N_TI_WL Line displine
uim: Inside st_uart_configuim: Un-Installed N_TI_WL Line displine
uim:cleanup
Can Any one help me how to solve this??
Thanks