AN 527 Selecting and Using GPIO Signals on DM3730/AM3703 SOMs: Document Update
Revision C of the Selecting and Using GPIO Signals on DM3730/AM3703 SOMs application note has been released. This revision adds a requirement to populate R197 on the Torpedo Launcher 3 Baseboard with a zero ohm resistor for proper operation. The document was also updated to point to available documentation about how to configure GPIO signals when using the Android BSP. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the DM3730/AM3703 SOM-LV product page on Logic PD's support site or at:
http://support.logicpd.co...id=0&EntryId=698
AN 582 Introduction to Direct Hardware Access with Linux Device Drivers: New Document
Revision A of the Introduction to Direct Hardware Access with Linux Device Drivers application note has been released. This document provides instructions about how to create and use a basic Linux device driver, and explains how the device driver interacts with the Linux operating system.
You can download this document from the DM3730/AM3703 SOM-LV product page on Logic PD's support site or at:
http://support.logicpd.co...d=0&EntryId=2766
AN 583 Set and Maintain Accurate Time on DM3730/AM3703 SOMs: New Document
Revision A of the Set and Maintain Accurate Time on DM3730/AM3703 SOMs application note has been released. This document explains the various methods available to accurately set and synchronize time on the DM3730/AM3703 SOM-LV.
You can download this document from the DM3730/AM3703 SOM-LV product page on Logic PD's support site or at:
http://support.logicpd.co...d=0&EntryId=2765