Go to previous topic
Go to next topic
Last Post 27 Sep 2007 09:41 PM by  paulc@logicpd.com
telent server on iMX31
 2 Replies
Author Messages
webdyndevnull@yahoo.fr
New Member
New Member
Posts:


--
13 Jun 2007 03:38 AM
    I have an iMX Litekit (1006581 Rev 2).

    I created an OS image including telnet server. It boots, the ethernet is well configured and I can ping the card. The firewall is disabled.

    When I start the telnet connection I have the message "Welcome to the Windows CE Telnet Service" but don't see the prompt. Yet, the session is well started : I can stop it entering 'exit'.

    Has someone seen this problem ?

    Nicolas
    dadawan@gmail.com
    New Member
    New Member
    Posts:


    --
    19 Jun 2007 11:58 AM
    Yes, I have the exact same kit. Also, I see the same problem. If you keep hitting 'enter' it will eventually spit out the rest of the text. It is basically working, but not quite usable yet.

    -Kevin
    paulc@logicpd.com
    New Member
    New Member
    Posts:


    --
    27 Sep 2007 09:41 PM
    This has been reproduced and Logic is investigating. thanks for your patience.

    Forums Board Support Packages (BSP) Windows CE
    ---