Hello,
Im trying to hook up a Sharp 3.5" LQ035Q7DH06 to the imx31. This LCD is a follow up to the now discontinued LQ035Q7DB02 that LogicPD uses in its display kits. Functionality is similar as is the configuration, and presumably the wiring.
I had a question for the LogicPD team about a few signals on the LCD and was wondering what the corresponding pins were from the SDK.
The LCD has a signal called LP (Data latch signal of source drivers), and another called SPR (Sampling start signal).
Does LP correspond to the SDK's "LCD_HRLP" ?
What is the difference between SPR and SPL -- both are labeled Sampling Signal Start on the LCD's data sheet, can they both be tied to the SDK's "LCD_SPL" ?
thanks in advance
|